ian arnold's Discussions (79)

Discussions Replied To (62) Replies Latest Activity

"Breather tube, not cooling lines. I will drop the pan tomorrow and do a visual.     …"

ian arnold replied Aug 5, 2018 to Tranny trouble

5 Aug 6, 2018
Reply by Dennis Mobley

"I have similar problem. With timing light, my 63 is best at 16 degrees before tdc. I…"

ian arnold replied Mar 7, 2018 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"Buy. Buy. Buy"

ian arnold replied Sep 30, 2017 to WTB good 30 year or older GM station wagon built

19 Oct 10, 2017
Reply by Anders

"When i did my pertronics, i pulled the distributor out and worked on the bench. It s…"

ian arnold replied Sep 10, 2017 to Adding a petronix 1181ls

27 Sep 18, 2017
Reply by Tony and Ginny 429

"Hey kev. Here in toronto, we only have one poisonous snake, and ive never seen one i…"

ian arnold replied Sep 9, 2017 to I hope Tony and Ginny are OK.

6 Sep 9, 2017
Reply by ian arnold

"Ya. The timing mark has been jumping around, a bit. It was more pronounced earlier,…"

ian arnold replied Aug 30, 2017 to engine runs like crap

37 Aug 30, 2017
Reply by Russ Austin

"Before i owned car, but, if timing was off one tooth, it almost wouldnt run. Unless…"

ian arnold replied Aug 30, 2017 to engine runs like crap

37 Aug 30, 2017
Reply by Russ Austin

"Other theory im having.... is bad timing light. I have a new one with tach and advan…"

ian arnold replied Aug 30, 2017 to engine runs like crap

37 Aug 30, 2017
Reply by Russ Austin

"Good theory, but nope.  TDC is good on timing marks. Give or take 2 degrees. Removed…"

ian arnold replied Aug 30, 2017 to engine runs like crap

37 Aug 30, 2017
Reply by Russ Austin

"So. According to russ's photo above, the timing mark is supposed to be in line with…"

ian arnold replied Aug 29, 2017 to engine runs like crap

37 Aug 30, 2017
Reply by Russ Austin

RSS

Photos

  • Add Photos
  • View All

Forum

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 3 hours ago. 165 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Looking for 64 to 66 seat belt buckles, male and female together.

Started by Ryan Frawley in Wanted to Buy. Last reply by Tony and Ginny 429 yesterday. 5 Replies

Hey all, I am in the process of finishing up my 64 coupe deville and noticed that the front seat belts only have the retractor side in the bag I put all the belts in when I got it. I have found it…Continue

Tags: buckle, safety belt, seatbelt, seatbelts

Movie Star Cars.

Started by Kevin Campbell in General Discussion. Last reply by Kurt yesterday. 17 Replies

We have the Village Roadshow film studios about an 1.5 hour drive away.They've put out a call for cars to appear in a movie about Elvis. :-)So, I nominated our 64 Fleetwood as a potential "Movie Star…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Stuck at two red (dash) lights!

Posted by Jeff Kinzler on November 3, 2019 at 10:00pm 9 Comments

I hope someone can help solve these two electrical problems that appeared one after the other.

By way of background: The car, a '64 Eldorado has very limited use. It was at a restoration shop for 15 months until last January-  that supposedly did a bunch of wiring repairs including rebuilding the gas gauge that still hasn't worked properly, and the clock that hasn't worked, and re-soldering the broken wires in the drive door. All window and seat controls appear to be…

Continue

driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!

--Jake

Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service