Michael Long's Discussions (264)

Discussions Replied To (254) Replies Latest Activity

"Steve, you are correct. The PCV hose connects to a breather tube under the intake ma…"

Michael Long replied Sep 12 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"Steve, these cars can be frustrating for sure!  For now, you can disconnect the thro…"

Michael Long replied Sep 11 to timing to far advanced

28 Sep 12
Reply by Tony and Ginny 429

"The car looks AMAZING!!! Excellent work all the way around!!"

Michael Long replied Sep 14, 2018 to She's Almost Done!

59 Nov 22, 2018
Reply by Mark Borer

"Looks GREAT!!!  The LS swap is one of the most wonderful inventions in the wide worl…"

Michael Long replied Sep 11, 2018 to LS Swap

5 Sep 11, 2018
Reply by Michael Long

"I did a similar conversion with my '64.  The TH-400 was probably easier to fit as al…"

Michael Long replied Jul 26, 2018 to jetaway transmission internal pictures.

15 Jul 26, 2018
Reply by Michael Long

"Turbo 400 is probably the very best transmission of the era! They were used behind a…"

Michael Long replied Jul 26, 2018 to jetaway transmission internal pictures.

15 Jul 26, 2018
Reply by Michael Long

"I second that Chris! Before I knew of these two fellows, I was dealing with one of t…"

Michael Long replied Jul 10, 2018 to A Question for Mr. Edge

6 Jul 10, 2018
Reply by Tony and Ginny 429

"Amen brother! I know $800 comes easy for some people but that is a lot of hours at w…"

Michael Long replied Jul 10, 2018 to Interior Help Needed

25 Dec 2, 2018
Reply by Kim K Kaiser

"Hi Tony.  I would have loved to put a 4 or 5 speed manual transmission in my car whe…"

Michael Long replied Jul 10, 2018 to Interior Help Needed

25 Dec 2, 2018
Reply by Kim K Kaiser

"They quoted me "about 10 months" do re-do my 1961 Chevrolet Biscayne door panels 20…"

Michael Long replied Jul 9, 2018 to Interior Help Needed

25 Dec 2, 2018
Reply by Kim K Kaiser

RSS

Photos

  • Add Photos
  • View All

Forum

STEERING GEAR

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Mark S Anderson 2 hours ago. 12 Replies

IN addition to the main seal leak,,which i am going to tackle again tomorrow,i also have a leak in what seems to be the steering gear.  I have checked to connections from the pump, and its dry on…Continue

What front springs to use to level car back out after an LS swap?

Started by Richard Biele in 1963/64 Cadillac Specific Discussion 9 hours ago. 0 Replies

I see other members have put LS engines into their cars. I am wondering what springs you put in afterwards. I cannot determine the height due to the car having a front end fire (how I ended up with…Continue

2020 Cadillac calendars.

Started by Russ Austin in General Discussion 12 hours ago. 0 Replies

I just got in the 2020 Classic Cadillac calendars.  12 months of 63-64…Continue

Henry Leland- founder of Cadillac and Lincoln

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 23 hours ago. 2 Replies

Here's a good article about Henry Leland. I had heard bits & pieces of his story over the years but didn't know all these details.…Continue

Blog Posts

driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!

--Jake

Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…

Continue

Carter AFB carburetor question

Posted by Ray Schick on October 7, 2019 at 8:29pm 8 Comments

3655S carb, and a 3656S carb .I know the difference is one is for A/C and the other in for a non A/C car . Now the question is : can I use the carb bowl from the A/C car on the non A/C car ? They look the same set up next to each other

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service