Keith Benning's Discussions (14)

Discussions Replied To (12) Replies Latest Activity

"Thanks Tony and Ginny 429 I will try that as soon as I can. "

Keith Benning replied Sep 24 to Battery, alternator not charging

15 Sep 24
Reply by Keith Benning

"Hello all, I removed the alternator harness checked for continuity, it was good.  Th…"

Keith Benning replied Sep 22 to Battery, alternator not charging

15 Sep 24
Reply by Keith Benning

"Thanks Tony and Ginny will go back to drawing board and taking your advice and clean…"

Keith Benning replied Aug 17 to Battery, alternator not charging

15 Sep 24
Reply by Keith Benning

"Will do. Checking all the grounds again too!"

Keith Benning replied Aug 17 to Battery, alternator not charging

15 Sep 24
Reply by Keith Benning

"Thanks Tony and Ginny I thought that was 'different' too, did'nt know what it was un…"

Keith Benning replied Aug 16 to Battery, alternator not charging

15 Sep 24
Reply by Keith Benning

"Jason I charged up the battery, it read 12.7 started the car and let it run a bit th…"

Keith Benning replied Aug 16 to Battery, alternator not charging

15 Sep 24
Reply by Keith Benning

"Thanks Russ, checked battery with engine off and it was 12.5.  Started the engine an…"

Keith Benning replied Aug 16 to Battery, alternator not charging

15 Sep 24
Reply by Keith Benning

"John, Jason Edge has a video that details on how to find and test that hidden relay.…"

Keith Benning replied Jul 15, 2018 to Power windows

11 Jul 15, 2018
Reply by John Himsel

"Very nice looking great potential!"

Keith Benning replied Dec 14, 2017 to Rebirth of a Cadillac....

19 Dec 31, 2017
Reply by Jason Edge

"Thanks Russ!  I cut and changed all the connections I had with the new shrink connec…"

Keith Benning replied Aug 31, 2017 to Power windows

11 Jul 15, 2018
Reply by John Himsel

RSS

Photos

  • Add Photos
  • View All

Forum

Tail pipe black stuff!

Started by Lambert Ross in 1963/64 Cadillac Specific Discussion. Last reply by Lambert Ross 2 minutes ago. 10 Replies

any ideas how to clear the ugly black stuff shooting out from my tailpipe? After a long layover, it really messes up the garage floor. I assume its carbon but am not sure how best to react to it.…Continue

Had the 64 convert out for a spin

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion 50 minutes ago. 0 Replies

A two hour ride to my favorite restaurant on the water in Crystal River on the west coast  of central Florida —top down 77 degrees and 47 % humidity one outstanding day as will be the rest of the…Continue

Tags: Fl, River, Crystal

wanted balast tube for guide eye amp

Started by maurice lapoiinte in General Discussion. Last reply by Russ Austin 7 hours ago. 1 Reply

I am looking for a vaccum tube for my guide eye amp. tube #5947343 it call the ballast tube, its the shorter one of the 2 and only has a filament in it. fits 59-66 cadillacs with the guidematic…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 12 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

still need a driveshaft

Posted by wayne weaver on November 26, 2019 at 11:53am 0 Comments

well thank you UPS for losing the driveshaft that Russ Austin shipped me. 

however i still need a rear driveshaft section for my 63. mine has a vibration due to the bushing inside of it. its a shame because the ball and sockets in the cardian joints are perfect but it has a woble on the balancing machine. so .  still need the rear section. anyone have a good one ? is there driveshaft alternatives to use ? i am really considering an LS swap and since im fighting the driveshaft search…

Continue

63 guidematic issues

Posted by maurice lapoiinte on November 24, 2019 at 3:10pm 0 Comments

 So my 63 guide matic headlamps stay on low beam all the time. I have so far bypassed the system and everything works normal. I have been thru the trouble shooting in the manual but this is where the confusion begins.on my car when the power relay is powered I have low beam and when its not powered I have highbeam, this appears to be opposite what the diagnosis says should be correct.The wiring is all original and no wires have been mixed up.has anyone ever unplugged the 2 wire connector…

Continue

Another advantage of the Pertronix III

Posted by Doug Scarrow on November 23, 2019 at 11:12am 1 Comment

   Having tried both the II and III I can say the multispark feature of the III offers a smoother idle . It is also easier to install .Does not require removal of the distributor

Stuck at two red (dash) lights!

Posted by Jeff Kinzler on November 3, 2019 at 10:00pm 9 Comments

I hope someone can help solve these two electrical problems that appeared one after the other.

By way of background: The car, a '64 Eldorado has very limited use. It was at a restoration shop for 15 months until last January-  that supposedly did a bunch of wiring repairs including rebuilding the gas gauge that still hasn't worked properly, and the clock that hasn't worked, and re-soldering the broken wires in the drive door. All window and seat controls appear to be…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service