Chris's Discussions (170)

Discussions Replied To (150) Replies Latest Activity

"Didn’t feel anything out here in San Diego. Many people in parts of L.A. and Orange…"

Chris replied Jul 5 to Earthquake...

7 Jul 9
Reply by Tony and Ginny 429

"Good to know Russ, is it a hard job to do? How long does a repair like that take? I…"

Chris replied Mar 19 to valvetrain noise cadillac 1964 429 cui

51 Sep 27
Reply by Robert Tor

"Speaking of different oil viscosity, I’ve  tried all different types of oil for my 6…"

Chris replied Mar 18 to valvetrain noise cadillac 1964 429 cui

51 Sep 27
Reply by Robert Tor

"Yes sir that is exactly what I am looking for!"

Chris replied Aug 31, 2018 to 64 Vacuum hoses from Carb/Intake routing location questions with pics.

18 Aug 31, 2018
Reply by Tony and Ginny 429

"Sure thing Clovis, I will work on it this weekend, as I want it to be correct and ev…"

Chris replied Aug 30, 2018 to 64 Vacuum hoses from Carb/Intake routing location questions with pics.

18 Aug 31, 2018
Reply by Tony and Ginny 429

"I remember the last time I checked the plugs, they looked to be burning ok with a ta…"

Chris replied Aug 30, 2018 to 64 Vacuum hoses from Carb/Intake routing location questions with pics.

18 Aug 31, 2018
Reply by Tony and Ginny 429

"Will do Tony thank you for the advice. What about the aluminum plate at the Carb  th…"

Chris replied Aug 29, 2018 to 64 Vacuum hoses from Carb/Intake routing location questions with pics.

18 Aug 31, 2018
Reply by Tony and Ginny 429

"Ok thank you guys so much, the trans mod valve hose does seem odd and incorrect. I’v…"

Chris replied Aug 29, 2018 to 64 Vacuum hoses from Carb/Intake routing location questions with pics.

18 Aug 31, 2018
Reply by Tony and Ginny 429

"Hi Jay, I actually looked at the link you posted In the help section before i posted…"

Chris replied Aug 29, 2018 to 64 Vacuum hoses from Carb/Intake routing location questions with pics.

18 Aug 31, 2018
Reply by Tony and Ginny 429

"You guys are hilarious lol There’s a YouTube video regarding the 20,000 mile or “One…"

Chris replied Aug 21, 2018 to My Mobile one story

15 Aug 21, 2018
Reply by Chris

RSS

Photos

  • Add Photos
  • View All

Forum

STEERING GEAR

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Mark S Anderson 1 hour ago. 12 Replies

IN addition to the main seal leak,,which i am going to tackle again tomorrow,i also have a leak in what seems to be the steering gear.  I have checked to connections from the pump, and its dry on…Continue

What front springs to use to level car back out after an LS swap?

Started by Richard Biele in 1963/64 Cadillac Specific Discussion 9 hours ago. 0 Replies

I see other members have put LS engines into their cars. I am wondering what springs you put in afterwards. I cannot determine the height due to the car having a front end fire (how I ended up with…Continue

2020 Cadillac calendars.

Started by Russ Austin in General Discussion 11 hours ago. 0 Replies

I just got in the 2020 Classic Cadillac calendars.  12 months of 63-64…Continue

Henry Leland- founder of Cadillac and Lincoln

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 23 hours ago. 2 Replies

Here's a good article about Henry Leland. I had heard bits & pieces of his story over the years but didn't know all these details.…Continue

Blog Posts

driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!

--Jake

Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…

Continue

Carter AFB carburetor question

Posted by Ray Schick on October 7, 2019 at 8:29pm 8 Comments

3655S carb, and a 3656S carb .I know the difference is one is for A/C and the other in for a non A/C car . Now the question is : can I use the carb bowl from the A/C car on the non A/C car ? They look the same set up next to each other

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service