Hi the  390 motor in my 1963 Coupe is toast and can not be repaired. I am in need of either a complete motor or small block or big block any block. I have tried most of the advertised parts dealers on the site but no luck. Any help in finding one would be greatly appreciated. 

Views: 136

Reply to This

Replies to This Discussion

The parts you are looking for —may be available right here when the boys come by 

Enjoy 

Not sure what you mean by when the boys come by in  your reply. Thanks.

He's referring to Jason and Russ.

You must've done a number on the 390 for it to be unrepairable. Did it throw a leg out of bed?

I bought the car as is knowing that there was a problem with the motor. When I tore it apart,  I found out that a piston had disintegrated and the connected rod when through the cylinder leaving a two inches hole. Now I have to replace it or rebuild one with the good parts that are left.

Holes in the block, geez, some bondo and chemi weld and you're going again. LOL

Since I reside in Eastern Canada I was thinking more likes duck tape or hockey tape LMAO. But I do have my work cut out. It's a long winter here so I have time on my hand to get the motor ready for spring.

Hehe, "duck tape" is a bit funny. However where I live its called "Strömma tape". Strömma is a large passenger vessel company and, according to the rumour, they are famous for repairing everything on their boats with the gray sticky tape originally named duct tape.

Picture of Strömmas Östanå in a wintry Stockholm archipelago:

Btw Kevin, when you get here an archipelago cruise is on the schedule. However not with Strömma. We will take a steam boat cruise on Storskär eating steam boat steak.

For those that doesn't know, steam boat steak is a tender piece of meat that is put on the coal shovel and into the furnace of the boiler for a few seconds. Tastes a bit weird and sooty. Well worth it for a motor head.

I have bare blocks, short and long blocks.   My email is  russ85747@hotmail.com    Located in Tucson AZ

Hi Russ. We have communicated already by e-mail on Sunday. I will send you another reply by e-mail and see if we can work something out. 

 Marcel

I am sure you now understand what  I meant  by the boys stopping by as we have the regular crew that lives here and drop in very often to help others out with parts and hands on advice 

Do acquire any parts you may be needing from Russ as he has been doing great business since I am on this site as a consultant  ( 3-4 times ) daily since 2006 

Anything Jason can do for you will be golden as well 

These guy live and breath our year cars with the knowledge to get you the correct item at the right price 

Enjoy 

Thanks I will get in touch with Russ.

RSS

Photos

  • Add Photos
  • View All

Forum

Exhaust Manifold Gaskets......Again

Started by Ian Osborne in 1963/64 Cadillac Specific Discussion. Last reply by Mack 17 hours ago. 22 Replies

I know I'm not the only one who has dealt with constantly failing exhaust manifold gaskets but I have the heads off for a valve job and I'm trying to fix the issue once and for all. Well, maybe for a…Continue

Good independent mechanic recommendation West LA, CA area?

Started by Gene Fattore in 1963/64 Cadillac Specific Discussion. Last reply by Gene Fattore 18 hours ago. 2 Replies

This is off topic as my daughter is NOT driving my '64 Cad in LA, but a yeoman old Saturn (recent impoverished college grad).  I am 2000 miles away and unable to review and service the car.  Can…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 20 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

63 Fleetwood Eldorado parts wanted

Started by Stephen L Hrynda in Wanted to Buy yesterday. 0 Replies

Need 6 side molding clips (for molding above rocker molding)Also need right front wheel opening moldingContinue

Blog Posts

63 Caddy Horn

Posted by Robert Alan Shannon on May 27, 2020 at 9:25am 9 Comments

 Just noticed a 1963  Caddy trumpet horn on Ebay. No part # given but some of his other items are 1963 specific, just throwin this out there, I have no connection to this listing .

Wiring connection help.

Posted by Jimmy Davis on May 24, 2020 at 9:15pm 2 Comments

Can someone help me figure where these connections go? I have a 64 60 special if it matters.…



Continue

Wood grain finally done.

Posted by Jimmy Davis on May 20, 2020 at 4:57pm 3 Comments

After years of wanting to, I finally redid my wood dash paneling on my 64 60s. Not too hard to do either.…

Continue

390 engine replacement needed

Posted by Jason on May 18, 2020 at 7:54pm 1 Comment

I’m looking for a 1963 Cadillac 390 engine that runs. 

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service