Hello Friends, Members and Passionists alike,

can please someone help or have a link ?

1963 Coupe de Ville

Driveshaft is making a little noise and vibrates , starting at 55-65 miles per hour.

anyone has parts , replacement and or a capable shop who does such work?

this link doesn't list Cadillac specifically but GM with various Length etc

https://www.nationaldrivetrain.com/axle.php

any advise or help will be gladly appreciated

thank you and 

kind regards

André

Views: 96

Reply to This

Replies to This Discussion

First click:

Then scroll down:

You should find some useful info there. Maybe it will not solve your problem, but its a start.

Thank You much appreciated 

I'll certainly will look at it

Probably the carrier bearing assembly going bad.  Take the drive shaft out and deliver it to a shop that specializes in drive shafts. They can get new carrier bearing assemblies.  The CV or Constant Velocity joints wear and are not available new.   They can be rebuilt to new standard.   The rear section has a setup to reduce vibrations, but after 50 plus years, the rubber is deteriorating.  I just spent 800 dollars getting my drive shaft completely rebuilt with a new rear section eliminating the rubber section.

Oh that sounds actually pretty good.

Is it already built back in and how is the result?

Who did the rebuilt solution on yours?

Russ

Pls do share the shop that repaired and rebuilt your drive shaft with good results

The drive shaft ( propeller shaft in manual ) vibration issue has been a problem for many
Some spending a lot of money with little results to show for it

We need a solid good shop thst can do the right thing with the drive shaft in our cars when that service is needed

Enjoy

RSS

Photos

  • Add Photos
  • View All

Forum

Is this possible or total BS?

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 21 minutes ago. 5 Replies

After changing tie rods, i tokk car into wheel n allignment shop. He said no problem.  He calls back about 45 minutes later and said they couldnt get between the tire and cowl, the guys head was too…Continue

Vacuum / Parking Brake / NSS Question

Started by Karl Schwarz in 1963/64 Cadillac Specific Discussion. Last reply by Karl Schwarz 1 hour ago. 2 Replies

I bought a 1963 Series 62 Convertible in July.It makes a hissing sound when in neutral, and sometimes when in drive (when the shift is more to the left that the right. I assume this related to a NSS…Continue

Tail pipe black stuff!

Started by Lambert Ross in 1963/64 Cadillac Specific Discussion. Last reply by Lambert Ross yesterday. 10 Replies

any ideas how to clear the ugly black stuff shooting out from my tailpipe? After a long layover, it really messes up the garage floor. I assume its carbon but am not sure how best to react to it.…Continue

Had the 64 convert out for a spin

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

A two hour ride to my favorite restaurant on the water in Crystal River on the west coast  of central Florida —top down 77 degrees and 47 % humidity one outstanding day as will be the rest of the…Continue

Tags: Fl, River, Crystal

Blog Posts

still need a driveshaft

Posted by wayne weaver on November 26, 2019 at 11:53am 0 Comments

well thank you UPS for losing the driveshaft that Russ Austin shipped me. 

however i still need a rear driveshaft section for my 63. mine has a vibration due to the bushing inside of it. its a shame because the ball and sockets in the cardian joints are perfect but it has a woble on the balancing machine. so .  still need the rear section. anyone have a good one ? is there driveshaft alternatives to use ? i am really considering an LS swap and since im fighting the driveshaft search…

Continue

63 guidematic issues

Posted by maurice lapoiinte on November 24, 2019 at 3:10pm 0 Comments

 So my 63 guide matic headlamps stay on low beam all the time. I have so far bypassed the system and everything works normal. I have been thru the trouble shooting in the manual but this is where the confusion begins.on my car when the power relay is powered I have low beam and when its not powered I have highbeam, this appears to be opposite what the diagnosis says should be correct.The wiring is all original and no wires have been mixed up.has anyone ever unplugged the 2 wire connector…

Continue

Another advantage of the Pertronix III

Posted by Doug Scarrow on November 23, 2019 at 11:12am 1 Comment

   Having tried both the II and III I can say the multispark feature of the III offers a smoother idle . It is also easier to install .Does not require removal of the distributor

Stuck at two red (dash) lights!

Posted by Jeff Kinzler on November 3, 2019 at 10:00pm 9 Comments

I hope someone can help solve these two electrical problems that appeared one after the other.

By way of background: The car, a '64 Eldorado has very limited use. It was at a restoration shop for 15 months until last January-  that supposedly did a bunch of wiring repairs including rebuilding the gas gauge that still hasn't worked properly, and the clock that hasn't worked, and re-soldering the broken wires in the drive door. All window and seat controls appear to be…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service