Hello Friends, Members and Passionists alike,

can please someone help or have a link ?

1963 Coupe de Ville

Driveshaft is making a little noise and vibrates , starting at 55-65 miles per hour.

anyone has parts , replacement and or a capable shop who does such work?

this link doesn't list Cadillac specifically but GM with various Length etc

https://www.nationaldrivetrain.com/axle.php

any advise or help will be gladly appreciated

thank you and 

kind regards

André

Views: 55

Reply to This

Replies to This Discussion

First click:

Then scroll down:

You should find some useful info there. Maybe it will not solve your problem, but its a start.

Thank You much appreciated 

I'll certainly will look at it

Probably the carrier bearing assembly going bad.  Take the drive shaft out and deliver it to a shop that specializes in drive shafts. They can get new carrier bearing assemblies.  The CV or Constant Velocity joints wear and are not available new.   They can be rebuilt to new standard.   The rear section has a setup to reduce vibrations, but after 50 plus years, the rubber is deteriorating.  I just spent 800 dollars getting my drive shaft completely rebuilt with a new rear section eliminating the rubber section.

Oh that sounds actually pretty good.

Is it already built back in and how is the result?

Who did the rebuilt solution on yours?

Russ

Pls do share the shop that repaired and rebuilt your drive shaft with good results

The drive shaft ( propeller shaft in manual ) vibration issue has been a problem for many
Some spending a lot of money with little results to show for it

We need a solid good shop thst can do the right thing with the drive shaft in our cars when that service is needed

Enjoy

RSS

Photos

  • Add Photos
  • View All

Forum

Steering Wheel

Started by Mark Borer in General Discussion 2 hours ago. 0 Replies

plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue

Exhaust manifold: Repair, replace or headers?

Started by Dutch Dickinsen in General Discussion 2 hours ago. 0 Replies

My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue

Tags: 429, manifold, exhaust

Help! I need a 1964 Eldorado front left fender.

Started by Jorge M in Wanted to Buy. Last reply by Jon Ettman 4 hours ago. 5 Replies

Help looking for a 1964 Eldorado front fender for a convertible.Thank you please contact djjmoreno84@gmail.comContinue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 23 hours ago. 157 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Upper A Arm Rubber Bumpers

Posted by Gene McIlroy on August 12, 2019 at 1:30pm 3 Comments

I have found a very good replacement part for the Upper A Arm Bumpers.  The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were.  The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer.  Part number is on the box in the photos.  First photo is the box next to the box is the S10 part and an original.  Next photo shows my sanded down part next to an original.…

Continue

Roof motor

Posted by Dermot Robinson on August 11, 2019 at 8:44am 2 Comments

Replacing my convertible roof motor.

Has anyone any experience or advice on replacing the roof motor on a 1964 Cadillac Deville .

Please..

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service