Looking for a good ignition lock nut bezel for 1963! This is the chrome piece that holds the ignition housing in place and protects painted dash from key scratches. Opening must be more than 15/16" wide. If anyone has one, let me know, thanks!
I have an original ignition switch bezel/nut that has some scratching (see pic below) but is a good usable bezel. Price is $5 and can ship 2 to 3 day Priority to US destinations for $7 for a total of $12. If interested shoot me a PayPal Payment to email@example.com.
Well, got it all together,, Jason, i was looking in the wrong chapter in the manual on the starter,, got that figured out. everything hooked back upGot it put back together, started up, and oil…Continue
Hello All,Took the car in for front end alignment and car remains at facility. The tech drove the car into bay and returned it to the same spot that I drove into. Paid for work and was ready to drive…Continue
today was a black saturday: my 1964 Caddy "baby" only drives in the first gear and reverse. so I drained the oil (6 liters - not drained the converter) , pulled off the pan and the filter. just dirt…Continue
can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.
On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that? I checked here and the shop manual, but can't find a complete guide.
As always, and help or direction is appreciated. Thanks!
Thanks for letting me join the club. Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…
3655S carb, and a 3656S carb .I know the difference is one is for A/C and the other in for a non A/C car . Now the question is : can I use the carb bowl from the A/C car on the non A/C car ? They look the same set up next to each other