I have decided to sell my 1964 Convertible project. I just haven't had the time to work on it.
I have installed new floor pans. They need finishing, also additional rust repairs are needed. Engine and transmission are from a 63 Coupe. Runs and will drive. New aluminum radiator and carb has been rebuilt. Engine is a 390. Interior is complete and out of the car. I have all of the trim for it plus a spare dash and parts from the 63 including the steering column for the correct neutral switch. Also have spare rear end and front brake assemblies.
Did some looking around to see where i could find some new 265 75r 15 radial tires for the 64 convert The current radial I have on the car I was very surprised to see the size has become a problem…Continue
what is the vacuum canister for that is behind the drivers front fender?After removing my fender I see its got a hole in the top but nothing is hooked to it and no line is laying there.Any help would…Continue
looking for LH drivers side boomerag piece, middle piece for the grille, both braces on the back of the grille and the lower end of the bumper on the right side. My car was hit in the front end. Its…Continue
My 1964 Cadillac electrical system is running around 17 volt which is to high,the alternator, battery and the voltage regulator was replaced but the voltage is still to high, could it be the pig tail that plugs into the voltage regulator.