It's my first time posting a question.  I want to add seat belts front and rear to my 64 convertible. Seems like all suppliers have them in 60 or 74 inch lengths. Most passengers are of average typical size and I did the rope measure test and 60 inch belts seem the way to go. Does anyone know what the original length that was produced when new. Any and all thoughts are welcomed.

Thanks John Boening

Views: 128

Reply to This

Replies to This Discussion

John

At the top of the home page see a group of headings.  Click on the Help button.   All help topics are arranged in alphabetical order.  Scroll down to seat belts sections.  I believe you will find a lot of your questions answered there.

Thank you Gene,

I am just starting to use 63/64 and appreciate the help navigating the site. Saw lots of other info there too. Now can anyone help me rotate my picture or should I delete and repost it. Newbies, geez

John, On your profile picture you can re-crop but do not see any rotate editing available so you need to rotate it upright with software on the device it resides then reupload. Once you have it upright just click on Settings and you will see the link to upload a new profile picture.

 

You can flip an image (on your "My Page" only) using the advanced setting on the "My Page" tab.    Go to "My Page", and just below your profile pic, click "customize"

Then,  on the Design Page, click "Advanced" on the top left

Then, paste "#xg_themebody #xg img{transform: rotate(180deg);}" at the bottom of that window.  That will rotate your main image 180 degrees.  When you're done, it should look like this (on a windows 10 desktop):

Finally, click Publish at the bottom right, and your profile pic will be flipped (mine is now).   Note that it only flips the picture on your page, so chat thumbnails and the actual image if you click on it will render as you posted it.  nonetheless, it will show upright -part- of the time.   Like mine, for example:

RSS

Photos

  • Add Photos
  • View All

Forum

is there a body manual?

Started by john kilbourne in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 19 minutes ago. 1 Reply

I have an original shop manual for the 64 deville. Is there a separate printed body manual?Continue

wanted, '64 tilt turn signal switch WITH cornering contacts.

Started by john kilbourne in Wanted to Buy 1 hour ago. 0 Replies

I have the regulra one.Continue

Convertible Top Pump Leak

Started by Lee Martin in 1963/64 Cadillac Specific Discussion. Last reply by Mark S Anderson 2 hours ago. 8 Replies

Does anyone have experience with leaky pump or connections to pump?  I have a slow one and it's driving me crazy trying to see where the fluid is coming out.  It is definitely from the pump area (not…Continue

Fuel gauge access

Started by Tosh Dickenson in 1963/64 Cadillac Specific Discussion. Last reply by Tosh Dickenson 3 hours ago. 14 Replies

Do I really have to remove the dash pad to access the back of the instrument panel..specifically the fuel gauge.  1964 DevilleContinue

Blog Posts

Electrical

Posted by Anthony Boles on August 8, 2020 at 5:46pm 0 Comments

My 1964 Cadillac electrical system is running around 17 volt which is to high,the alternator, battery and the voltage regulator was replaced but the voltage is still to high, could it be the pig tail that plugs into the voltage regulator. 

63 Caddy Horn

Posted by Robert Alan Shannon on May 27, 2020 at 9:25am 10 Comments

 Just noticed a 1963  Caddy trumpet horn on Ebay. No part # given but some of his other items are 1963 specific, just throwin this out there, I have no connection to this listing .

Wiring connection help.

Posted by Jimmy Davis on May 24, 2020 at 9:15pm 2 Comments

Can someone help me figure where these connections go? I have a 64 60 special if it matters.…



Continue

Wood grain finally done.

Posted by Jimmy Davis on May 20, 2020 at 4:57pm 3 Comments

After years of wanting to, I finally redid my wood dash paneling on my 64 60s. Not too hard to do either.…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service