You can clean permatex with alcohol
Work neatly with the product
Glad we caught you in time to save you some time and aggrivation
Looks like you now have what you need to get her done
Yes you are right about the bolt going into an oil passage in the head
You can use a sealer on that bolt
Any go into the water passageways? Which ones, hoping its not the one I broke the head off!
Tom, The "B" bolt you broke off circled in yellow below does not go into an oil or water passage. it simply goes through the water pump and front engine cover into a raised front mounting area on the front of the block. Behind the end of the bolt is a solid thick steel wall. If you were to go all the way through you would end up in the valve lifter compartment and that would take some doing!
WONDERFUL, Expect to receive a Cardone WP in a few days from Rock auto, already have a return label to send back the Gates WP to them for refund. Should be ready to install by midweek, pump new /replacing hoses, belts, gaskets . Already have the new heater core (old one leaked bad) installed earlier this week. Floors are all welded in, floor sound barrier installed .
Started the interior prep work today on the rear (6) side panels. Should see seat upholstery coming in very soon, received the vinyl that matches the seats for the rest of the interior this past week. Then on to the six way seat conversion to get ready for the upholstery part.