My AC blower has been making a little noise on and off. I thought, it might have been a bit of leaf litter in there until today.

I think I have a bearing in the blower motor going to lunch. I'll have a read up on the good book tonight for the removal instructions etc.

Anything I should be aware of before I start ripping out stuff and throwing it all on the floor. LOL :-)

Views: 238

Reply to This

Replies to This Discussion

With Tony's sense of humour, its a wonder Ginny hasn't turned Tony into an angel.

Now that's funny!

So imagine ---what would happen if i didn't ---Love You Guys !!!

Enjoy

Hey, now this is pretty interesting.

Lets go back just over a year ago: My A/C guy was gassing me up and asked for full fan speed. I replied, that is full fan speed and we gassed away. I've never owned a 64 Cadillac before and quite frankly, while it wasn't mind blowing, it was working ok-ish.

Then a while back, on a really stinker of a hot day, I found if I flipped the quarter vent windows open, it gave a bit more flow through speed.

Then, around 2 or 3 months ago, the blower fan would make a slight noise, like it had a leaf stuck in there that would foul on the fan once and a while. It was getting a little more pronounced over the last couple of weeks until yesterday, when I thought it had collapsed a bearing.

I took the Fleetwood for a short, maybe 3 or 4 mile drive just now, and it has way more air flow than before. I can't help but think, the fan has been slipping on the shaft for a while, until it finally got really loose and started making a God Damn racket.

I'm feeling pretty chuffed now.

Hey Tony, tell Ginny, I know a really good way she can bump you off and it will look like an accident. 

Kevin, are you now talking about Jason's bank shaft and Ginny pushing Tony into it?

Kevin, pull your glovebox out and and check that the power servo arm is at full a/c position. If you have a slight vacuum leak at the transducer it will allow the system to go into low fan speed and not full fan speed. It will also allow the heat to partially come on to balance the system. Even though the controller at the driver is calling for full a/c. This is all caused by a slight leak of vacuum to the power servo past the transducer. 

I'm fairly sure I've got full fan speed now, but I will check it this morning. Thanks Clovis.

Ha ha ha Anders, you might just be on to something there.

Kevin,

First look with almost everything on the ‘64 is go over vacuum lines- starting with the long one that feeds from the reserve tank to the control unit behind the glove box. For a 2 dollar piece of hose you might save yourself a weekend of unnecessary work. 

Nobody expected these cars to be around this long and not to get driven every few days. 

Best way to keep your beautiful Fleetwood in ship shape is to drive it.  

Kevin

You are forgetting i am the one who is related to the Mafia families
Not just any Mafia family but the one that runs the whole show
Bada Boom Bada Bing --LOL !

So your suggestion for Ginny would not hold up well around here
I might have to contast my Austraiia branch if you keep it up -- PMSL !

Enjoy

Tony, the MAFIA will have no chance when they go up against an Aussie who's as mad as a cut snake.

Bring it on I say, bring it on. LOL

Now thats funny !!! --And a big part of why i can ENJOY myself as much as i do

Enjoy

Anyone have a schematic for vaccum lines?

RSS

Photos

  • Add Photos
  • View All

Forum

TURBO HYDRAMATIC

Started by STEPHEN HORWATH in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 53 minutes ago. 14 Replies

I JUST ACQUIRED A 64 DEVILLE TURBO HYDRAMATIC TRANSMISSION FROM A PARTS CAR.COMES WITH SPACER,FLYWHEEL AND TORQUE CONVERTER AND SHIELD. I DONT KNOW WHAT A FAIRPRICE WOULD BE TO ASK. ANY SUGGESTIONS?Continue

Re upholstering seats

Started by paul in Restoration Discussion. Last reply by Mark S Anderson 1 hour ago. 2 Replies

Hello all, my question pertains to interior of a recent barn find.  A 1963 cadillac sedan with 16000 original miles.  Unfortunately it had mice in the car, so of course the whole interior which is…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 8 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Free front brake drums and shoes for '64 DeVille

Started by Preston Bealle in 1963/64 Cadillac Specific Discussion. Last reply by Preston Bealle 8 hours ago. 7 Replies

I converted my '64 to front disc brakes. I have the drums and shoes and parts that the car came with. Anyone can have them if you want them, just pay shipping, which won't be cheap since they are…Continue

Blog Posts

Is there a separate Starter Relay, or does the Solenoid serve that purpose?

Posted by Norman Silverman on August 30, 2019 at 5:57pm 7 Comments

Hello All.

I will be replacing the starter solenoid tomorrow (actually my mechanic will do the work, I'll just supervise). In checking the FSM electrical schematic and chapter verbiage, I don't see anything that looks like (or is referred to as) a starter Relay. It seems the Starter Solenoid serves the function and there's no separate relay. Right or Wrong?

If wrong, where…

Continue

Starter Solenoid replacement-how difficult? Where to buy?

Posted by Norman Silverman on August 20, 2019 at 8:24pm 8 Comments

Hello All.

I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …

Continue

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service