I am looking to sell this car as is. It is a great car that was rebuilt/restored in the late '80s. My father-in-law bought it, worked on it some and then became too ill to continue.
He purchased it around 2000. It was running well until he had a friend work on the water pump. Since then it has sat in the garage for 10 years.
This car is now part of an estate sale
VIN Style 64-6267BodyFW16697 ('62 series in '63). I believe it is the 429 with turbohydromatic trans.
We have the clean title and it is 2019 registered California, Stanislaus County.
See attached photos.

Looking for about $6K OBO
Let me know what you think and spread the word. 
Thank you,
Paul Tanis

Views: 123


Reply to This

Replies to This Discussion

what is the price?

Listing says "Looking for about $6K OBO".

Yes,  $6K OBO.  I will be back in state in March where I will get more info on condition.  It has been stored indoors in a very dry climate. I intend to crank it over to confirm the engine is not ceased, take a parts inventory, get more detail about interior, dash, convertible top condition, take more photos, etc.


Maybe pull the plugs and squirt some Inox, WD40 or similar in the plug holes and let it sit for a few hours, before turning it over by hand.

In my humble opinion, I wouldn't just put a battery in and crank it with the key after sitting for a while.

Thanks, good suggestion.  Do you think it matters that the distributor has been removed, cranking by hand?

No, it won't hurt anything with the dizzy out.

If it turns over nicely, you might want to fit and time the dizzy and have it running.



  • Add Photos
  • View All


Where to get brake booster and master cylinder rebuilt

Started by Chris Gill in 1963/64 Cadillac Specific Discussion. Last reply by Chris Gill 16 minutes ago. 25 Replies

Hi folks,I'm new to Cadillacs so bear with me if this question has already been answered but I did a search of the forum and couldn't find an answer.It appears I have an original master cylinder…Continue

water pump

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion 19 minutes ago. 0 Replies

i was doing some reading and was thinking about water pumps.   somewhere on this site, i remember reading about how the new replacement parts have to be adjusted to work or they are set right, or…Continue

Bypassing the suction throttle valve

Started by Russ Austin in General Discussion. Last reply by Clovis 58 minutes ago. 1 Reply

Cant find the post where the suction throttle valve was bypassed with an adjustable part.   What was it?Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Tony and Ginny 429 1 hour ago. 149 Replies

I have posted a…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…



Posted by Mike Petrey on January 13, 2019 at 12:25pm 7 Comments

Where do the flashers go in my 64 Deville Convert.  I'm thinking that's why both turn signals stopped working.

Source for Motor mounts and Trans mounts 1964 SDV

Posted by Norman Silverman on January 9, 2019 at 4:23pm 4 Comments


Where is the best place to purchase good quality motor mounts/trans mounts for my 1964 SDV? I see that Rock Auto has them for $8 and change, and others for $24 and change. Big difference. Is there a better place to buy them from?




  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service