I believe my 64 AC is working right. But I thought if the center vent had directional fin's it would work better here in Sunny south Florida. As it stands they only direct air flow forward, up and down. It is so hot here that you only get cool if you but your hand in front of the vent and direct the air flow towards yourself.  Has any one invented a cover with directional fin's ? 

Views: 46

Reply to This

Replies to This Discussion

Try some think card board from a shoe box. Glue gun the louvers in place from the back side. 

Thank you Russ. I like it, not to sure about gluing tho.  Going to see if forcing them in place will work first.

Back in the day we were more prone to having passengers in the back seat, even Coupes, and that center vent was designed more to push air up and back thru the cabin, while the side dash vents were more personal front passenger vents.  Redirecting that air toward the driver or front passenger will take that much more air from getting to the back. Again, probably not a big deal but if you make this change and do have a back seat rider, expect them to be pretty uncomfortable on a really hot day.  For me it wouldn't be an issue as I rarely ever have anyone in the back seat other than my pooches... and they prefer the windows down!  It's a dog thing!


Is your rear window leaking ? I can see the headliner is wrinkled above the package tray.

No leaks. I redid that piece way back and didn't pull the material tight enough when I reglued it. It is hard to find good help! LOL



  • Add Photos
  • View All


Radio restoration

Started by Joe DiIaconi in 1963/64 Cadillac Specific Discussion 1 hour ago. 0 Replies

I had my 1964 radio restored a few years ago and now it's not working correctly. Can anyone recommend a reputable place to have it restored again?Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 10 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Grandpa’s Cadillac Restoration

Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 21 hours ago. 13 Replies

Hello friends! It’s been a while since I’ve visited this page. Last I left I had spoke about my late grandpa’s Cadillac that I planned on “restoring”, which really meant getting back on the road.…Continue

Crankshaft - ‘64 Sedan Deville

Started by Jordan Johansen-Moe in Wanted to Buy. Last reply by Jason Edge yesterday. 1 Reply

Hello friends! I’m looking for a crankshaft for a 429 that will begin Grandpa’s Cadillac Restoration. I will be talking to a machine shop on Monday (fingers crossed). However, in the event I hear the…Continue

Blog Posts

1964 Cadillac Fleetwood sixty special / transmission dipstick needed

Posted by Pablo on September 20, 2020 at 9:57pm 1 Comment

How are you doing folks, I’m looking for a transmission dipstick, any info I will appreciated, thank you very much

1963 Cadillac hood driver side hinge

Posted by Steven on September 16, 2020 at 9:23am 1 Comment


 Does anyone know were I can buy a 1963 Cadillac hood driver side hinge or is there any other hinge that would fit? 



Bad Guage?

Posted by Karl Schwarz on August 26, 2020 at 3:08pm 5 Comments

So I am troubleshooting my fuel gauge issue. I bought a new sender and tested it. It  it goes from 1-ohm (empty) to 35-ohm (full). When I test it (outside the tank), when the float is in the up (full) position it only moves the gauge to about 1/2 full. When at the bottom (empty) position the gauge shows empty. This is the same issue I have when I fill and then use the gas in the tank - the gauge never reads ore than half full. Based on what I've read on this thread it would seem like the…



Posted by Fritz Seitz on August 11, 2020 at 2:35am 0 Comments

I have been working on a website-----www.fritzsautorepair.com-----

Does anyone have suggestions?


  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service