I bought this beauty a year ago and at that time the AC system was flat.  I replaced a line that had a huge hole in it, pulled a vacuum, charged it with R12 and it started making cold air !!!! Oh happy days !!!

AC runs great until I take the transmission out of Park (and put it into Drive or Reverse).  At that point it just fan shuts down.  If I put it back in Park the fan starts blowing cold air again. 

What the heck ?   My only thought is that it might have something to do with the neutral safety switch (it hisses when I put car in Drive). 

Any suggestions ??

Views: 161

Attachments:

Reply to This

Replies to This Discussion

My above post should read -
I do second Kurt's suggestion

Sorry Kurt !

Enjoy

No problem Tony. I've been called much worse : )

Hi Guys,

Thanks for all your suggestions.  I have been troubleshooting the AC pneumatic system and all things point to the "rotary valve" on the passenger side interior.  I bought the $20 manual and it gives direction on how to recondition the rotary valve.  It doesn't sound too difficult.  Has anyone done this before and do you have any advice ?

Robert

I did disassemble my rotory valve on the servo behind the glove box but it was some time ago
I just put it back together the way it came apart with no issue as i recall
The rotory valve on the back of the confort control controls was a bit more difficult to work with but do not recall the details

The point i want to make is i did find debri in that rotory valve and the rotory valve behind the confort control controls so cleaning the valves was rewarding and a good idea to have the AC work correctly

Do what you must to be sure all your hoses are holding a vacuum ( no air leak )
Plug what you must to have the system hold as much of a vacuum as you can and then you can get back to resloving the leaking hose or leaking vacuum valve for example
You will be establishing the parts of the CC that you will need to be replacing in the future at this same time

Enjoy

Thanks .  Just got done refinishing the valve.  No big deal.  Not very intimidating (once you've done it).  Thank for the advice.

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 13 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Extension Housing Hydramatic

Started by M123 in 1963/64 Cadillac Specific Discussion. Last reply by M123 yesterday. 1 Reply

Hi.Can you on a 64 remove the extension housing with the gearbox still in the car? The car have the Hydramatic.Did work on the car last night and did feel a very large play on the outgoing axle,…Continue

1965 Cadillac DeVille

Started by DanielAndrew in For Sale on Saturday. 0 Replies

1965 Cadillac DeVille On Ebayhttps://ebay.to/2W6axyTContinue

Trun signal swit

Started by Jeff S. in Wanted to Buy. Last reply by Charles Fares on Friday. 2 Replies

Hello all!Looking to either repair my existing turn signal switch or source a new one. Any suggestions?Thank you ub advance!Continue

Blog Posts

Cadillac Returns to its Roots Under New Leadership

Posted by Jeff Kinzler on May 1, 2019 at 12:30am 3 Comments

Cadillac’s new boss says they should stop trying to build BMWs and go back to building Cadillacs again.

What do you think? 

https://carbuzz.com/news/cadillac-finally-admits-what-everyone-knew-for-years

Radiator And Shrouds

Posted by Dominic Salemi on April 24, 2019 at 3:36pm 1 Comment

Hello

Anyone have a decent radiator and shrouds and hardware for a 1964 Cadillac deville. I have an alum. radiator and I'm deciding on to fix it or back to the original one. If I fix it I won't need parts.

Thanks

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service