These guys have the correct factory stock alternators with correct part number stamped and the correct date code for a 63. They have one 1964 date code, so hurry and call them. Cars without AC have PN 1100629 AC cars have PN 1100633 I just ordered a concourse restoration on a PN 1100629 with the correct date code for my 63.  When you call, have the productuon date code from the body name pate. Check out this link to figure your production date code out. http://6364cadillac.ning.com/profiles/blogs/body-name-plate Here is the shop, and they have lots of other goodies and services for a GM car, like NOS AC Delco parts. http://www.corvettestop.com/alternator-restoration.html

Views: 41

Reply to This

Photos

  • Add Photos
  • View All

Forum

Caddy Shack parts & services news

Started by Russ Austin in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 10 hours ago. 66 Replies

I will be having shoulder surgery on April 17th, and will be limited to packing up small parts only for a little while.I am going to try and see how it goes with getting my son to help out, but that…Continue

What's it gonna cost me?

Started by Haris dizdarevic in General Discussion. Last reply by Russ Austin 13 hours ago. 4 Replies

What's it going to cost me to buy an original rebuilt carburetor from one of you fine gents! Or possibly one that needs to be rebuilt thanks!!Continue

Is He Dead!?

Started by Jason Edge in General Discussion yesterday. 0 Replies

Posted this to Facebook and thought I would share here...IS HE DEAD!? ... thought this was a funny looking picture captured from my corner Nest Cam. My wife Cheryl had come out to see if I wanted…Continue

Jason

Started by Tony and Ginny 429 in General Discussion. Last reply by Jason Edge yesterday. 29 Replies

No Description

Blog Posts

HVAC Vacuum Valve Clip-need the one for the Power Control side

Posted by Norman Silverman on September 17, 2018 at 8:15pm 6 Comments

Hi.

Update:

I removed both 7 nipple vacuum valves and called my buddy who owns a machine shop. Tomorrow we'll re-surface the valve faces and then I'll reinstall them. HOWEVER, the one that comes out easily and comes apart with no rivet is on the Power module side. It installs on one side with a small bolt, and on the other it is held on by a clip, WHICH IS MISSING ON MY CAR. I am going to assume it is the same clip that is used on the Control Module side. Anybody got one? Happy…

Continue

7 vacuum valve-need a good one or someone to recondition mine

Posted by Norman Silverman on September 15, 2018 at 5:44pm 12 Comments

So, I've put my 7 vacuum valve from the control head side to the test, and it failed. I looked at the instructions for re-conditioning it and unless I am missing something, the instructions are missing something (about how to take off the clip that provides the tension that holds the two pieces together). 

In any case, I can't do this particular repair so I am looking for a new valve (not likely), or a good re-conditioned one, or someone who has done this before and would do mine for…

Continue

Mosiac Cadillac emblem Table

Posted by Dana G Cooper on August 30, 2018 at 10:48pm 11 Comments

Wanted to share a picture of a table my wife made for me to display with our 63 Coupe Deville. 

Inside door handle thread size

Posted by Michael Jarnagin on August 23, 2018 at 4:31pm 1 Comment

Anyone know the thread size on the inside door handle bolts mine are missing any info much appreciated 

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service