Now that my 63 is painted im working on the interior. Planned on using a local shop but at under 1k for the front and back seat upholstery seems very reasonable. If anyone has used this kit, please post pictures.

Views: 94

Reply to This

Replies to This Discussion

Carpet kits just don't fit right. Get an upholstery shop to custom fit the carpet. Not sure on the rest.

Carpet i was told that really only one company makes the actual carpet, no matter where you buy.

Im more interested in hearing from someonr who used the seat upholstery

Never used opgi for seat upholstery, be more inclined to buy the material and have a custom shop install it, probably will put in new foam also. As far as the carpet goes if it isn't really hammered take it out and have it professionally cleaned. Then have it dyed, you can match it to a side kick. There are people out there that do this. We have a guy in Ct that does this and vinyl repair and he is the best. I did this to the carpet in my 64 and it looks great and stays original. Besides most of the carpet from these places just isn't that great, but then it depends how fussy you are.

With the car being a convertible it had water damage from over the years, and the floor pans were totally rusted. The carpet has already been thrown out. There was no saving it.

RSS

Photos

  • Add Photos
  • View All

Forum

Ordering Polyurethane Replacement Trailing Arm Bushings

Started by Dan McNarry in 1963/64 Cadillac Specific Discussion. Last reply by Dan McNarry 4 hours ago. 4 Replies

There seems to be growing interest in the poly bushings. In order for me to keep track of who wants bushings, please send me a message along with or in lieu of a reply to either this thread or the…Continue

What gasket or seal at the PCV pipe under intake?

Started by Tosh Dickenson in General Discussion. Last reply by Russ Austin 11 hours ago. 3 Replies

Wonder what kind of seal goes on the metal PCV pipe under the intake?  It looks like the larger part is kind of a press fit into the manifold but maybe there was a rubber gasket under the bolt that…Continue

1964 Interior AC/Heater Box Removal

Started by Travis in Restoration Discussion. Last reply by Travis 21 hours ago. 13 Replies

Newby question here!  I've read through the shop manual and as many threads as I could find on here, but I'm still stumped on exactly how to remove the interior plastic Heater/AC box from my 64 SDV…Continue

Tags: vacuum, mode, door, box, a/c

Drain plug and speedo bullet seal.

Started by Pete Grodem in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 3 Replies

Hello,Sealing  up my 63 Jetaway duel coupling and questioning the drain plug and the speedo bullet, both used an o ring for sealing. This does not seam proper as the o ring gets crushed when…Continue

Blog Posts

How to sensibly deal with the Corona Virus

Posted by Jeff Kinzler on March 14, 2020 at 5:02pm 6 Comments

https://theamericanscholar.org/covid-19-a-primer/

I found this very helpful, written by a knowledgeable authority in public health. 

Remember, Viruses are not spread by Cadillacs so get out and drive!


Safe & Healthy travels. 

Jeff Kinzler

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 1 Comment

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service