Hello everyone, I installed last year a new Edelbrock 1406 on my Cadillac.

Since I have a big black soot residue on the floor of my garage. Is this normal or adjustment is bad. I followed the installation instructions on the DVD that is in the box.

Views: 181

Attachments:

Reply to This

Replies to This Discussion

Gerald, make sure the choke is pulling all the way off, and then read your plugs.

Either that or just leaving the car idling after it has warming up. You need to depress the accelerator to take off high idle and choke once warmed up.

The sequence of the electric choke warming is correct, the throttle is opened slowly and steady speed. I also can also eliminate the choke by rapidly pressing the accelerator pedal.
The hot engine, this problem never comes back. I think one option choke control with a probe in the engine block water would be good. Russ and Jason, thank you for your advice.
See how your plugs are burning ,once you kNOW the engine is running as good as it can ( this is important ) ,with a complete tune up ,and carb adjustment on a dwell meter
Pull the plugs ,and examine the color they are burning
They SB a brown paper bag color
If they are darker than that ,you are running rich ,and need to reject the carb,to run the correct color plugs
The Edelbrock techs will explain the next set of jets to go to if you tell them ,the current plug color, you have
I have the 1406 carb and had to rejet my carb to get the plugs burning right
Hi Tony,

It is a good idea. Before taking the restart of, I will remove the spark plugs and control their colors. Only they can determine if the mixture is too lean or too rich. I have a friend who has a machine in his garage to control the Co rejected by my exhaust, but I have not yet had time to go up to his house.

Thanks for advice!

That's what I said in my post. "reading the plugs" refers to looking at them, to see how the cylinder is burning.

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 6 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

spark plugs

Started by Ron Perry in 1963/64 Cadillac Specific Discussion. Last reply by Ron Perry 22 hours ago. 6 Replies

Gentlemen   I have a 1964 Sedan De Ville with 20 thousand original miles. I am going to replace the spark plugs. What plug would you recommend? I only drive the car a few hundred miles a year and the…Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 22 hours ago. 170 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service