I'm looking to buy a new fuel sending unit for my car and was wondering if anyone has had recent dealings with Caddy Daddy and if so, yeah or nay?

Views: 130

Reply to This

Replies to This Discussion

 Dan

Caddy Daddy will be on the more expensive side for  what he has 

 Dan

One on eBay for a 62 - $54.00

Put in - 1962 gas tank sending unit —-and it came up 

Good idea. Thanks!

I bought mine from USA Parts & Supply (www.usapartssupply.com) I'm guessing 15+ years ago. It is a little off on the gauge, but that is expected and there are adjustments but I don't feel like dropping the tank and going thru the process.

I carry them new for 85.00  I test them to make sure they are accurate. The gauges in the car tend to be off after all these years. I find alot of gas gauges that are not accurate. 

Thanks Jason.

Russ,that sounds great. I don't mind keeping my business "in the family". I'll e-mail you shortly.

Russ, I installed the sending unit yesterday afternoon and went and filled the car up this morning. The gauge now reads accurately and I'm really happy to have it working again, makes road trips a lot less stressful. Thanks for a great product.

The unit requiring some adjustment for the gas  gauge to work as it should does make Russ are go to guy for this gas gauge sending unit purchase 

Nice work Russ for all you do for our community and this in particular at this time 

Enjoy and Stay Safe my friend 

Dan 

Glad to here your fuel gauge is now working as it should  with parts fro Russ ñand good peace of mind from that on the road 

I think you must have your trans out while doing your clutch work and oil pan work 
If so do consider putting a can of STP in the trans as the smoothness of the synchro meshing will be an amazing experience that  I myself did on my t-10 4 speed 
Changed the feel of the  smoothness of the messing synchros so much better than ever before ( 100 % better ) 

I think you will enjoy the new feel a lot 

Enjoy 

Tony, the new to me peace of mind regarding my fuel was put to the test today. We took a nice drive in the mountains and went a longer route than we normally would knowing we would easily make it back on the tank full we started out with. No guessing when to head back home. Awesome.

On the tranny oil front, TREMEC recommends AC Delco GM Synchromesh oil so that's what I use. The new clutch works great and shifts are butter smooth. One down side to this recommended oil is that it is fairly thin which makes the tranny noisier than a muncie running thicker oil.  

RSS

Photos

  • Add Photos
  • View All

Forum

ISO mechanic recommendations in Charlotte, NC

Started by Daniela in 1963/64 Cadillac Specific Discussion. Last reply by Daniela 1 hour ago. 2 Replies

All, I just got my 63 Eldorado Biarritz and am looking for a good trustworthy mechanic/garage that can do repairs and maintenance for it since my knowledge about mechanical things are very limited. I…Continue

63 DV RatRod- need advice

Started by Bob Ricks in 1963/64 Cadillac Specific Discussion. Last reply by Bob Ricks 4 hours ago. 14 Replies

Hi gang;1963, 390V8I'm looking to clean up a few oil leaks around the Motor Oil pan.  I'll be removing the exhaust & exhaust manifolds and replacing with basic headers and new dual exhaust.. …Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Balancer and flywheel

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kim K Kaiser yesterday. 3 Replies

I dropped off my block at machine shop other day, and asked about balancung the crankshaft, wheter i needed to get all the pistons, rings, etc. For him to weigh them and balance.  I had seen it done…Continue

Blog Posts

Help on Removal of rear seatback on 64 convertible

Posted by Nile Bolen on January 8, 2021 at 11:44am 7 Comments

I'm trying to remove the rear seatback on my 1964 deville conv.  The only help on this site that I can find is the following:

The seatback, its bright stainless trim, and the speaker grille are removed as an assembly.  The seat back hangs on two hooks near the top, and is retained to the body by two bolts and washers near the floor, one on the right side, one on the left.Once these fasteners are removed, lift the seat back upward and free it from the hooks

I've removed…

Continue

Bumper lower bucket

Posted by Ray Schick on January 1, 2021 at 4:33pm 3 Comments

1964 Convertible Seats.

Posted by michael moorman on November 30, 2020 at 5:29pm 1 Comment

Are the front and rear seat frames the same for 63/64 Coupes and Convertibles because Original parts group  makes reproduction seat covers for 1963 only and and i prefer the 1963 seat pattern so with that being said does anyone have information regarding this thanks.

Picture of ignition switch

Posted by Cees de Bunje on November 27, 2020 at 6:20am 0 Comments

Does anyone have a close-up picture of the ignitionswitch with keys in it made in landscape format? Switch must be in dashboard. Many thanks in advance. Cees.

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service