I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at www.facebook.com/classiccadillacparts and will post a few here  on this thread from time to time.

For items you are interested in send email me to jasonedge@nc.rr.com   

To save us both time be sure and provided details including year, body style, color, location (left or right, front or rear, etc), and any other information I need to identify the part. 

ps... be sure and "Like" my page!

Jason.

Views: 34913

Reply to This

Replies to This Discussion

Nice 1963-64 Series 62 6-Way Seat Harness - $35
Just pulled an excellent 2-piece 6 way bench seat harness that fits 1963 & 1964 Series 62 Coupes & Sedans with the switch in the base trim of the seat. These are different from the deVilles and Fleetwoods & 1963 Series 62 convertibles. Price is $35 and includes both sections. Email me at jasonedge@nc.rr.com

Nice 1963-64 4W Sedan Side Window Lower Reveal - $100 for 6pc Set

Just pulled a very nice complete side window lower reveal trim set that fits all 63/64 Sedan front doors, and 4 window Sedan rear door body styles. This was a northern mostly garaged car and rubber is very nice. All trim is very nice, with one very small blemish on left rear. $100 for Complete set or will sell individually. Email me at jasonedge@nc.rr.com

63 Bench Seat Rail Cover Set - $85 <-- Click for More Pictures

I just pulled a complete 1963 bench seat rail cover set in Grey. The left and right lower inners (attaches to seat rail), and left upper outer (attaches to seat) are excellent and are $30 each. The right upper outer had come lose and bent down and inward on the back but I took the heat gun and straightened most of it out. Needs just a bit more work but is OK as is and otherwise nice. $15 for this piece. I would take $85 for the complete set, or will sell individually as noted. I also have the push in tabs to secure them to seat and seat rail if needed. Email me at jasonedge@nc.rr.com

1958 to 1968 C-Pillar Rear Courtesy Lights - $25 each

Just pulled a very good set of rear courtesy lights that fit 1959 to 68 Cadillac equipped with the small round chrome lights. Chrome has nice sheen with only a bit of sprinkling here and there. Base is excellent and bulb has been tested. $25 each or $45 for the pair. Email me at jasonedge@nc.rr.com

63-64 Sdn Rear Qtr & Door Side trim - $125 set

Just pulled a nice set of the lower side trim on that fits the 1963 & 1964 Series 62 & deVille sedans. Nice sheen, with only very minor blemishes on one rear qtr. Door trim pieces are $25 each. Rear Qtr is $35 each or $125 for all 6 pieces.

Super Nice 1963/64 Cadillac Instrument Cluster - $125  <-- Click for More Pictures

Just pulled an excellent 1963/64 Cadillac Instrument Cluster Assembly from a 73K mile donor car. It includes speedo head unit, shift quadrant indicator, and casing, and front lens. It does nto include the temp/fuel Gage. The indicator is for a Hydramatic but can swap out for a THM shift quadrant if you have a 64 with the THM trans. Price is $125. NOTE: I also sell just the speedo head unit for $85. I also sell the temp/fuel gage assembly for $75. I also have very nice chrome outer bezel for both the tilt and non-tilt columns ranging in price based on condition. Email me at jasonedge@nc.rr.com

Excellent 1963 Series 62 Sedan Door Panel Trim - $90 for Complete 4 Door Set

Just pulled an excellent 1963 Cadillac Series 62 Sedan door panel trim set. Price is $25 per door, or $90 for all 4 doors. These are very nice pieces! Email me at jasonedge@nc.rr.com

1961-64 Hydramatic Transmission from 73K Mile Car - $350 <-- Click for More Pictures

I just pulled a Cadllac Hydramatic transmission from a 1963 parts car with 73K original miles & shifting good when parked. This fits all 1961 to 1963 Cadillacs, and 1964 Cadillac body styles that came equipped with the Hydramatic (Series 62, Series 75, Commercial Chassis). 

Includes the rear trans mount, torus and flywheel. Other than fluid, filter, and gasket and rear seal change, this one should get you back on the road for many years.

The price is $350. 

Due to size and weight you would need to arrange transport or pickup. If within a reasonable distance from me I can deliver for a fee. www.EngineShipping.com has shipped most of the heavier items such as this for my customers and I can give you the details.

My address is 104 New Rand Rd, Garner, NC 27529. I am about 10 miles SE of Raleigh, NC and within 35 miles of I-40, I-95 and I-85 as they cross thru NC for any East Coast Travelers.

Email me at jasonedge@nc.rr.com.

VG+ LH 1963 Cornering Light - $65

Just pulled a very good left driver side cornering light from 73K mile donor car. 90% of inner reflective material is super nice, with only corrosion in a small are. Tested and gives off a nice bright light! Price is $65. Email me at jasonedge@nc.rr.com


Nice 1961-63 Series 62, 1963-65, Door Reflectors - $15 each
I just pulled 4 nice door reflectors (parts group 14.691, part # 441 0338) that fit 1961 to 1963 Series 62 body styles (except 63-6267 conv), and the 1963 to 1965 Series 75 body styles. These have very minimal pitting and very nice overall. Price is $15 each or $45 for set of 4. Email me at jasonedge@nc.rr.com

1963-64 Cadillac AM Only Radio - $75  <-- Click for More Pictures

I have a very nice looking 1963/64 AM radio from a 73K mile donor car that plays great, but wonder bar does not work. The tuner, volume, and all other controls work great and it plays great. Knobs and front face look really nice and not badly pitted like many that I bring in. Since wonder bar is not working I have priced to sell at $75. Email me at jasonedge@nc.rr.com. Provide your mobile # and I can text a video showing it playing.

RSS

Photos

  • Add Photos
  • View All

Forum

390 with vibrations

Started by Bo Authèn in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 14 minutes ago. 6 Replies

After renovating both the engine and the automat, I have vibrations. Not sure if they come from the engine or the transmission. Can the flexplate versus converter be wrong? or the flexplate against…Continue

Jason

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion 2 hours ago. 0 Replies

I really liked your comment about  the social distancing  rule  regarding our year cars - as requiring a cell phone due to the extensive distance between individuals  —— now that’s FUNNY —-LOL !…Continue

Tags: distancing, Social

63 deville

Started by Brian in Wanted to Buy 5 hours ago. 0 Replies

Hello everyone, I’m looking for a 63 Cadillac deville left and right lower front bumper buckets. If you have any for sale or know of anyone selling any, please let me know. Thank you Continue

Gas tank overfilling and fumes...anybody else?

Started by Tosh Dickenson in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 8 hours ago. 3 Replies

Anybody else have a problem with your gas tank overfilling then draining out the overflow?  I've done the service bulletin with relocating the vent and drilling the hole in the top.Every so often…Continue

Blog Posts

64 Power Servo vacuum leak

Posted by Kent Prows on June 27, 2020 at 4:02pm 0 Comments

I finally got around to fixing a leak in my heater core.  I decided to check to see if there were any other obvious issues while I had everything torn apart.  When I put a vacuum directly (bypassing the transducer) to the power servo it gets to about 10" and then slowly leaks back to zero.  The fan will not go to full and the mode door will not open completely.  I have read a couple of other posts that said they repaired the power servo leaks.  How?  Does anyone have one to sell?  I just…

Continue

63 Caddy Horn

Posted by Robert Alan Shannon on May 27, 2020 at 9:25am 9 Comments

 Just noticed a 1963  Caddy trumpet horn on Ebay. No part # given but some of his other items are 1963 specific, just throwin this out there, I have no connection to this listing .

Wiring connection help.

Posted by Jimmy Davis on May 24, 2020 at 9:15pm 2 Comments

Can someone help me figure where these connections go? I have a 64 60 special if it matters.…



Continue

Wood grain finally done.

Posted by Jimmy Davis on May 20, 2020 at 4:57pm 3 Comments

After years of wanting to, I finally redid my wood dash paneling on my 64 60s. Not too hard to do either.…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service