Classic Cadillac Parts For Sale - Misc Items

[Jason Edge]

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at www.facebook.com/classiccadillacparts and will post a few here  on this thread from time to time.

For items you are interested in send email me to [e-mail]   

To save us both time be sure and provided details including year, body style, color, location (left or right, front or rear, etc), and any other information I need to identify the part. 

ps... be sure and "Like" my page!

Jason.

[Jason Edge]

Misc Cadmium Plated 1/4"-20 Hex Bolts/Screws - $1 Each

I am selling Cadmium Plated 1/4"-20 Hex Head bolts / Screws for $1 each. I have regular hex head and raised ridge head, self-tapping, and with different head markings. Lengths by type head include the following:

REGULAR HEX HEAD
1/4"-20, 1/2" Long
1/4"-20, 5/8" Long
1/4"-20, 3/4" Long
1/4"-20, 1" Long
1/4"-20, 1 1/2" Long

RAISED RIDGE HEAD
1/4"-20, 3/4" Long

RAISED RIDGE HEAD & SELF-TAPPING THREAD
1/4"-20, 5/8" lONG

HEAD MARKINGS INCLUDE
RBW, TR, LE, 3 dots (anchor), Anchor, M, M in circles, Dorman, etc.

Bolts are measured by diameter, thread pitch, length (bottom of head to tip), and type head, and hardness (standard, Grade 5, Grade 8, etc.) The bolts in this set are standard and raised ridge hex head 1/4" diameter with 20 tpi thread pitch (thread per inch), with the stated lengths. Some are Grade 5 and they are the same price, $1 each. Some are self-tapping with a tapered thread with groove designed to cut thread as it screws into metal.

NOTE: The bolt measuring tool seen at end of photos is extremely helpful for spec'ing a bolt and only costs a couple bucks at most hardware stores.

Email me at [e-mail]

[Jason Edge]

Misc Cadmium Plated 1/4"-20 Flange Head Bolts/Screws - $1 Each <-- Click for More Pictures

I am selling Cadmium Plated 1/4"-20 Flange Head Bolts / Screws for $1 each. I have regular flange head and serrated flange head, some self-tapping, and with different head markings. Lengths by type head include the following:

REGULAR FLANGE HEAD
1/4"-20, 5/8" Long
1/4"-20, 3/4" Long

REGULAR FLANGE HEAD & SELF-TAPPING THREAD
1/4"-20, 1/2" Long

SERRATED FLANGE HEAD
1/4"-20, 3/8" Long (only have one!)
1/4"-20, 1/2" Long
1/4"-20, 3/4" Long
1/4"-20, 1 1/2" Long (only have one!)

HEAD MARKINGS INCLUDE
E, L, RBW, B.Y., etc.

Bolts are measured by diameter, thread pitch, length (bottom of head to tip), and type head, and hardness (standard, Grade 5, Grade 8, etc.) The bolts in this set are flange head 1/4" diameter with 20 tpi thread pitch (thread per inch), with the stated lengths. Price is $1 each. Some of the 1/2" long bolts are self-tapping with a tapered thread with groove designed to cut thread as it screws into metal.

NOTE: The bolt measuring tool seen at end of photos is extremely helpful for spec'ing a bolt and only costs a couple bucks at most hardware stores.

Email me at [e-mail]

[Jason Edge]

Cadmium Plated 1/4"-14 Flange Head Sheet Metal Screws - $1 Each <-- Click for More Pictures

I am selling Cadmium Plated 1/4"-14 Flange Head Screws for $1 each. I call these "Sheet Metal Screws" as they have the very course 14 tpi thread and have a taper on thread end. Lengths by type head and thread include the following:

REGULAR FLANGE HEAD
1/4"-14, 3/8" Long
1/4"-14, 1/2" Long
1/4"-14, 5/8" Long
1/4"-14, 3/4" Long (only have 2)
1/4"-14, 7/8" Long
1/4"-14, 1 1/8" Long (self-tapping thread)
1/4"-14, 1 1/4" Long (pointed tip)

HEAD MARKINGS INCLUDE
E, L inside G, large thin C, M, RBW, plain

Bolts are measured by diameter, thread pitch, length (bottom of head to tip), and type head, and hardness (standard, Grade 5, Grade 8, etc.) The bolts in this set are flange head 1/4" diameter with 14 tpi thread pitch (thread per inch), with the stated lengths. Price is $1 each. The 1 1/8" long bolts are self-tapping with a tapered thread with groove designed to cut thread as it screws into metal.

NOTE: The bolt measuring tool seen at end of photos is extremely helpful for spec'ing a bolt and only costs a couple bucks at most hardware stores.

Email me at [e-mail]

[Jason Edge]

5-16"-18 Self-Tapping Ridge & Serrated Flange Head Bolts: $2 Each <-- Click for More Pictures

I am selling original 1963/64 Cadillac 5/16"-18 Ridge head, & Serrated Flange Head bolts, with Self-Tapping threads with New Cadmium Plating for $2 each. Almost all are 3/4" although I have a few at 1" and a couple at 7/8".

This is one of my last large batches of bolts with new Cadmium plating for now so get them before they are all gone!

Bolts are measured by diameter, thread pitch, length (bottom of head to tip), and type head, and hardness (standard, Grade 5, Grade 8, etc.) The bolts in this set have the serrated flange head which doesn't require a lock washer, and the raised ridge head bolts. All of these have the self-tapping tapered thread. These are used on various places on the cadillacs, often on fender and body brackets.

The bolt measuring tool seen at end of photos is extremely helpful for spec'ing a bolt and only costs a couple bucks at most hardware stores.

email me at [e-mail]

[Jason Edge]

1957-1966 Cadmium Plated Carb Mounting Stud & Nut 8 pc Set - $6

I have the 8 pc carburetor mounting stud and nut set with new Cadmium Plating that fits 1957 to 1966 Cadillacs for $6.

This Includes:
- (4) 1 7/8" Long studs with 5/16"-18 course thread on the bottom end, and 5/16"-24 fine thread on the top end.
- (4) 5/16"-24 nuts.

I also sell the studs individually for $1 each and the nuts for 50 cents each.

NOTE: Per Master Parts Book not split (lock) washer was used but have those with New Cadmium Plating for 25 cents each so just add $1 if you want for lock washers for a final total of $7.

Email me at [e-mail]

[Jason Edge]

As of right now 99% of the small to medium fasteners I had gold cadmium plated has been sorted, priced and posted on my Facebook page at this link:

https://www.facebook.com/ClassicCadillacParts/photos/...

The only thing I have not posted are the larger 1/2” and 9/16” bumper bolts and nuts which are currently being sorted and grouped.

All of the specs are there with every fastener. If you see something you want, email me at [e-mail] and let me know specifically which pieces and we can get a total on price with shipping.

A NOTE ABOUT CADMIUM PLATING: Cadmium is a whitish-silver color that is applied with an electroplating process. The gold shown in the photos is the result of a gold or yellow chromate conversion. In the 50s, chromate solutions became available so that metals treated could be clear, yellow, gold, and olive. Many found the yellow and gold with their iridescent red, green and blue coloration attractive. Many platers call this Yellow-Gold Rainbow Plating or simply "Rainbow Plating". The finish is more commonly referred to as gold cadmium plated or yellow cadmium plated. You can add a chromate conversion to any plated metal or unplated metal. The chromate conversion increases the protection provided by cadmium plating.

All of my larger items have been “rack plated”, while the smaller fasteners are “barrel plated”, both with the cadmium plating base with the gold chromate conversion. To be clear, this IS Cadmium plating and IS NOT Zinc plating. I have had questions about whether or not this plating will affect bolt and nut thread size. For all practical purposes the answer is no. The old cadmium or other based plating is stripped from the old fasteners, then the new plating is applied resulting in basically the same size thread. It is of course always a good idea to chase newly plated threads with a tap & die before installing and torqueing.

[Jason Edge]

Gold Cadmium Plated Rear Bumper 1/2" Fasteners<-- Click for More Pictures

I have the 1963 & 1964 Cadillac Rear Bumper 54 piece - 1/2" bolt, washer & Nuts with new Cadmium Plating. Note the 14 attachment points in 2nd picture. Yellow arrows point to 1/2" hex head bolt, green arrows point to the 2 carriage bolts. Prices are as follows:

- 1/2"-20, 1 5/8" Long Grade 5 TR stamped bolts - $2.50 each or $30 for the 12 pc set

- 1/2"-20, 1 1/2" Long Carriage Bolts - $2 each or $4 for 2 pc set

- 1/2"-20 Grade 5 Hex Nuts - $1 each or $14 for 14 pc set

- 1/2", 1 1/2" wide washers - $1 each or $26 for the 26 pc set.

PRICE FOR COMPLETE 54 PIECE SET - $74

******** If you need something, email me at [e-mail] *********

NOTE: I am extremely limited on the washers but will get more in at some point in the future. I have a large batch of several hundred I will take to the plates on my 3rd round of plating.

[Jason Edge]

Cadmium Plated 63/64 Cadillac FRONT Bumper Fasteners <-- Click for More Pictures

I have the 1963 & 1964 Cadillac FRONT Bumper 52 piece - 1/2" & 9/16" bolt, washer & Nuts with new Cadmium Plating. Note the 16 attachment points in 3rd picture:

- Blue Arrows point to the large 9/16" hex bolts, washers & Nuts that mount large bracket to frame

- Pink Arrows point to the bumper bracket to lower center and lower end bumpers 1/2" carriage bolts, washers, and nuts

- Green arrows point to the larger bracket to smaller bracket slightly longer 1/2" carriage bolts, washers, and nuts

Prices and Qtys are as follows:

- 9/16"-18, 2" Long Grade 5 TR stamped bolts - 2.50 each or $10 for the 4 pc set

- 9/16"-18 Grade 5 Hex Nuts - $1 each or $4 for the 4 pc set.

- 9/16", 1 3/8" Wide washers - $1 each or $8 for the 8 pc set (DO NOT HAVE MANY OF THESE. A 1 1/2" wide washer with a slice out was also used and have a few of those at same price. See picture near the end.)

- 1/2"-20, 1 3/8" Long Carriage Bolts - $2 each or $16 for 8 pc set

- 1/2"-20, 1 1/2" Long Carriage Bolts - $2 each or $8 for 4 pc set

- 1/2"-20 Grade 5 Hex Nuts - $1 each or $12 for 12 pc set

- 1/2", 1 1/2" wide washers - $1 each or $12 for the 12 pc set. GETTING VERY LOW ON THESE.

PRICE FOR COMPLETE 52 PIECE SET - $70

*

[Jason Edge]

I had run out of the turned original drums but just got another pair back from machine shop. I will be having more good original drums turned in the coming weeks. Email me at [e-mail].

Turned 1960 to 1974 Rear Wheel Drums - $65 <-- Click for more pictures

I understand the aftermarket drums are not cast correctly and will not mount up and have seen a spike in the need for VG original drums. Right now I have a good supply and sell the rear drums turned and checked for $65 each. These are the same drums used on the front, minus the front hubs. I also sell the drums unturned for $45 each. The Master Parts Book indicates these are the same 1960 to 1974, except Commercial Chassis and 1967 and later Eldorado.  I have included pictures of 4 rear drums I just had turned. If interested email me at [e-mail] and provide shipping address.