Just picked up parts car #51 in Chattanooga TN. Will head back with my prize tomorrow.

Views: 167

Reply to This

Replies to This Discussion

When you get to # 100, as a celebration, you make the parts from that one free. :-)  LOL

100! 100!!! I thought I was retiring at 50.  If I make it to 100 it might be free anyway as I will be my final undoing... literally!

Oh stop it ya big baby.....

I've seen ya photos, you gotta have a couple of good years still left in ya.

Getting to car # 100 will be as easy as wetting the bed when ya drunk. You and Russ might have to tag team the car pick ups, he's running a few behind you.

I think I got a head start on Russ... We are like the Elvis and the Beatles of 1963/64 Cadillac Parts Cars and Parts.  I guess that makes you the INXS of the Australian Cadillac market!  

I think, a lot of folks, don't really know how lucky they are to have what you and Russ do for the wider 63/64 community. Gentlemen, take a bow and I tips my hat to you both.

Here in Oz, folks always ask, where the hell do you get parts for a classic Cadillac. I just tell 'em, there is two crazy bastards in the USA who can sell me most things I ever need and I can have the bits in anything from 5 to 14 days.

Thanks guys.

Can't wait to see more pictures of this one. I believe I heard this might have bucket seats! Very cool. 

Body panels are really rough, but that is only 6 parts of about 5000 parts and many more good items on this car.  Fired engine up a while ago and working on getting a video up on YT right now. will post on a bit.

RSS

Photos

  • Add Photos
  • View All

Forum

Cadillac Original Ads - 1964 Standard Ads

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 13 hours ago. 25 Replies

Just as I had done last December with the standard 1963 Cadillacs magazine ads, I have started scanning my 1964 Cadillac Ads, and will post here one by one, then combine into a single photo album and…Continue

Speedo Cable lubricant

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb Mar 12. 4 Replies

Eventually I’ll replace the speedo cable if needed but I believe the dash will need to come out to do that. However, shortly, I will be replacing the transmission on my 64 Fleetwood and I was…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon Mar 12. 1 Reply

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

Yaw bumpers

Started by Ron Perry in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Mar 10. 11 Replies

I have sent 2 photos of the Transmission yaw bumpers (side mounts) It appears they only touch the trans bellhousing on the very edge. Is that the correct position? Does not seem right to me but I…Continue

Blog Posts

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Clock ‘64 DeVille

Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments

Is there still a member in the Detroit area that refurbishes clocks?

Matt VH

Spark Plug Heat Range

Posted by Patrick Westphal on July 7, 2023 at 10:00am 1 Comment

I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.

Here it is:

 

The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)  

The insulator…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service