looking for 3 of these clips, anyone know where I can find them ?

Views: 51

Reply to This

Replies to This Discussion

Joe, I am a computer flunky , so I can't post a link, but Ebay seller savetheclassics sells electrical connectors like that & he's in Florida. HTH.

you can get the terminals on Amazon (CLICK HERE)

you can get the plastic shells online (CLICK HERE)

if you google gm 56 series terminal, lots of sources will come up.  The company that manufactures them is AUVECO, they have lots of distributors nationwide, Fastenal is one, if you have one nearby, they can source them.  Here in the northeast US, Napa has them in stock or in their warehouse locally.  
you can also try googling auveco part #s:

8777- male plastic shells
8775- female plastic shells
15956- male terminals
15957-female terminals

I did find them on ebay by that seller Robert,  but I felt $5.99 each was a pit pricey. After going through my stuff I found some female clips with Plastic covers. And bought 1 male on Amazon. So thank you both Robert & Mark.

get a box of the terminals, male and female.  I bought a bunch twenty years ago, probably two hundred in total, never at a loss now, it was a great investment in the longevity of my cars.

Bro, I have all that stuff at dirt cheap prices. Its not new, but its still good as new.

RSS

Photos

  • Add Photos
  • View All

Forum

Where to get brake booster and master cylinder rebuilt

Started by Chris Gill in 1963/64 Cadillac Specific Discussion. Last reply by Chris Gill 21 minutes ago. 25 Replies

Hi folks,I'm new to Cadillacs so bear with me if this question has already been answered but I did a search of the forum and couldn't find an answer.It appears I have an original master cylinder…Continue

water pump

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion 24 minutes ago. 0 Replies

i was doing some reading and was thinking about water pumps.   somewhere on this site, i remember reading about how the new replacement parts have to be adjusted to work or they are set right, or…Continue

Bypassing the suction throttle valve

Started by Russ Austin in General Discussion. Last reply by Clovis 1 hour ago. 1 Reply

Cant find the post where the suction throttle valve was bypassed with an adjustable part.   What was it?Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Tony and Ginny 429 1 hour ago. 149 Replies

I have posted a…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…

Continue

Flashers

Posted by Mike Petrey on January 13, 2019 at 12:25pm 7 Comments

Where do the flashers go in my 64 Deville Convert.  I'm thinking that's why both turn signals stopped working.

Source for Motor mounts and Trans mounts 1964 SDV

Posted by Norman Silverman on January 9, 2019 at 4:23pm 4 Comments

Hi.

Where is the best place to purchase good quality motor mounts/trans mounts for my 1964 SDV? I see that Rock Auto has them for $8 and change, and others for $24 and change. Big difference. Is there a better place to buy them from?

Thanks

Norm

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service