I've been thinking about upgrading to the CPP front disc brake kit for my 64. I'm running the wheel vintiques 15x6" Cadillac wire wheel. The brake kit says must use with a disc brake compatible wheel. Does anyone know if this wheel would work, and is anyone here running disc brakes with these wheels? Thanks for any help.

Views: 59

Reply to This

Replies to This Discussion

james just bought kit from opg made by cpp in my 63 with stock tires (wheels).make sure you don't buy big brakes kit.all went well on installation.got sick of front brakes pulling and trying to adjust.good luck 

I used ABS disk brake kit with Kelsey Hayes 40 spokes wires. 

I used ABS disk brake kit with Kelsey Hayes 40 spokes wires. 

RSS

Photos

  • Add Photos
  • View All

Forum

Convertible Top Cylinder Removal

Started by Brian Wiseman in 1963/64 Cadillac Specific Discussion. Last reply by Chris Codd 16 hours ago. 7 Replies

Just wanted to check before removing my 1964 convertible top cylinders.  I have the instructions from the 1964 shop manual.  I have identified, in Red #s, the bolts in the procedure with the images. …Continue

Input appreciated on a transmission issue

Started by Tosh Dickenson in General Discussion. Last reply by Tony and Ginny 429 17 hours ago. 11 Replies

Finally a sunny day to drive the Caddy into work!Alas when I set off down the road, I realized she wasn't shifting from first to any higher range.  I just drove it on Saturday and it was shifting…Continue

Mirror Passenger Side

Started by Bob Ricks in Wanted to Buy. Last reply by Bob Ricks 18 hours ago. 2 Replies

Seeking a Passenger Side Exterior Door Mirror.   Doesn't need to be perfect.1963 Caddy Coupe DevilleContinue

Headliner insulation

Started by Robert Alan Shannon in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon 19 hours ago. 4 Replies

 I have a question about the padding  used between the  headliner and  interior roof of hardtops . It's abt 1/8" thick and  I  want to remove this from my parts car because I use it for storage ;…Continue

Tags: padding, Headliner

Blog Posts

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service