The window's been fine as long as I've owned the car so I don't think it has an issue with the track. When you push the button to lift it, the lights dim, indicating to me that the wiring is OK because it's attempting to move but the window doesn't budge. I'm going to take it to a shop to fix it but wonder if I should buy a motor first, so the shop doesn't take the door apart and have to wait a few days if the motor is no good. I would think if the relay was the issue, the lights would not dim when the button is pushed?

Views: 57

Reply to This

Replies to This Discussion

Check the door jamb wires for grounding or touching each other.  It is usually a mess in there when the windows don't work.

Remove the rubber covering in the drivers door jam encasing the wires
Check all wiring to see if they are broken frayed or touching
Reconnect --by color any damaged wires
Keep in mind you --can have broken wires under the wire coating so bend the wiring some to find those
Best to solder and heat shrink ( if you have the skills ) and add a piece of wire in the break if wire is broken allowing more wire flexability in that location

Then see if the window motor works

It may very well be worth it to install a new motor if you plan on keeping the car for the long haul as that will always be the window most used in the car

It did take me a while to adjust the window so it closed to the top of thevframe as it should
I found it took me a few days while riding around with the door panel off to get it right myself

Enjoy

My wife says -- Just turn the handle -LOL ! !!

You should look over the window tracks and clean them up if needed while inside the door

You would want to replace the paper inner moisture barrier ( a kind of wax paper that should be fried by now ) with a sheet of plastic to redirect any water coming into the door from the outside of the window ( rain )
Be sure your door drain holes at the bottom of the door are free and not full of dirt collecting and keeping moisture in the doors bottom area ( will rust ! )

Enjoy

Before doing anything in my two prior posts
Do this first

Simply remove the motor and clean to shinny metal --the grounds of the motor which are its mounting points to the door
A very good chance all could come back to working as it should by just doing that

Tha is a -- General Rule --for any electrical problems related to our year cars

Old dirty ground connections prevent electrical flow from happening

Enjoy

OK, all great tips, I'll try a few things before I put it in a shop, though generally I do not like to remove door panels on cars as there seems to be a bit of art to getting them back on just right. I have taken an engine apart down to the last piece and reassembled but I don't like door panels!

RSS

Photos

  • Add Photos
  • View All

Forum

Blog posts

Started by Anders in Suggestion Box. Last reply by Anders 6 hours ago. 4 Replies

Think I figured out why blog posts are still posted instead of the preferred discussion posts.My guess is that members go to their "My Page" and from there click the "Blog Posts" and then post a blog…Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 11 hours ago. 169 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

MLK Day

Started by Chris Codd in General Discussion. Last reply by Kevin Campbell 20 hours ago. 1 Reply

A day late, but I saw a picture of MLK riding through Baltimore in a convertible and after a little research I found a different angle and saw that the car was a black '63 convertible so I had to…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 4 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

AC/heater for 1964 Cadillac coupe de ville

Posted by Matias J. Adrogue on January 7, 2020 at 11:11am 9 Comments

Good morning!  I am Matias Adrogue.  I bought a 1964 Cadillac coupe de ville last year and am real close to the final restoration details!  I call her “Jaws 64”.  Pics will be posted soon.  I need advise regarding a AC/heater.  It came stock in the vehicle but it does not work.  A mechanic gave me a bid of $1700 to replace and repair.  I am ready to install a new system - Vintage Air or Old Air Products from Fort Worth Texas.  I would greatly appreciate your thoughts.  I read the great write…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service