I converted my '64 to front disc brakes. I have the drums and shoes and parts that the car came with. Anyone can have them if you want them, just pay shipping, which won't be cheap since they are heavy. Hate to throw them out. They are in Connecticut. Can provide more detailed photos if you really want them. Brakes operated perfectly before I converted. I did that because I saw "Jay Leno's Garage" where he had converted an Imperial and some other cars to disc and was happy with the change. 

Views: 63

Reply to This

Replies to This Discussion

I'd be interested in hearing more about your conversion?

What kit did you use?  Any challenges with install and set-up?

I used a front disc conversion kit from Classic Performance Products which cost $745. It included an excellent new booster to replace the stock one. Other kids cost twice as much and this one is quite good. The pedal feel is different from when the drums were on, but it stops quicker and with more certitude. I'd never go back to drums, even for stock authenticity. My car is in excellent condition, but I'm not going to Pebble Beach. I drive it often and take it to local shows. And, these cars are heavy and we need them to stop without drama. 

As to challenges, yes, since you asked, but not because the job is so tough. I went to a local mechanic who'd done good work on the car. This conversion seemed to befuddle him. He kept the car for months. He said I needed spacers to create distance from the disc to the wheel, and I got them, but even then the car just sat there. I finally took it elsewhere and they got the whole thing done in one day!! With no spacers! So I have the original wheels on and it's great. The discs sometimes have the little squeak, and I have not dealt with it yet, it's nothing really. I know there's a spray but I have not bothered. A couple of times, with drums, the front wheels locked up and skidded and I thought, that's it, no more of this. It's a great upgrade. I'm used to the different pedal feel and there are no issues with the braking performance. Jay Leno was right. Oh, and I feel no need to convert the rears. The fronts were enough to improve the performance significantly. 

My Car was bought new off the showroom floor in 64 and extremely well maintained always over the years for the —-sheer LOVE of the machine 

In all the years I have owned my 64 convertible  I have not once had to question weather the stock drum brakes would stop the car —on a dime —when called apron 

That applies to many other Cadillac years I have owned 

So for me a disc brake replacement is of little value when the stock brakes  working correctly do the job they were designed to do 

Between the cost of the brake kit and a mechanic to do the job this is an expensive thing to replace something already doing the job it was designed to do 

Very sorry to hear the one guy kept your car for so long and did little work on it  ( just the BS routine ) 

They want the car in there shop so they look like they work on high end cars to there  other customers while tying up you great car 

Just my 2 cents on this upgrade —as there are an awful lot of ways to spend your dollars to bring a car back to life in so  very many areas 


Yes, you make some good points here. The stock drums should be adequate to stop the car. However, two things. In my case, the brakes locked up twice at a stop sign and screeched. I could either redo the brakes as is for a few hundred dollars, or for a little more change them out to disc with a more powerful booster. Seemed the wiser choice. Again, I got the idea from Jay Leno's show, where he swore by this change for his heavy Imperial. Disc brakes hit the Corvette in 1966 and then started spreading throughout all cars fairly soon. So clearly, they are the preferred choice. Soon after 1968-69 drums were unacceptable on any decent car but the lowest end of the market. Cadillac introduced them in 1968 if I'm not mistaken.


Is this the kit? 1134 USD now, 745 USD was a lot lower.

Here's the kit on Ebay, for $707, on sale from $745. It's for 61-66 Cadillac


And this one for under $500 without the new booster also listed. But these are brakes, you can't mess around, I'd get the new booster and have the right pressure and be safe. However, I'm not a brake expert. I've done everything to cars, including dismantle an engine to the block and rebuild it over the last 50 years, but not once have I touched the brake system. Being in a car that fails to go is one thing, but a car that fails to stop is quite another. So I have mechanics do brakes, though I gather they are pretty simple. 




  • Add Photos
  • View All


Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 16 hours ago. 164 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Looking for 64 to 66 seat belt buckles, male and female together.

Started by Ryan Frawley in Wanted to Buy. Last reply by Tony and Ginny 429 18 hours ago. 5 Replies

Hey all, I am in the process of finishing up my 64 coupe deville and noticed that the front seat belts only have the retractor side in the bag I put all the belts in when I got it. I have found it…Continue

Tags: buckle, safety belt, seatbelt, seatbelts

Movie Star Cars.

Started by Kevin Campbell in General Discussion. Last reply by Kurt yesterday. 17 Replies

We have the Village Roadshow film studios about an 1.5 hour drive away.They've put out a call for cars to appear in a movie about Elvis. :-)So, I nominated our 64 Fleetwood as a potential "Movie Star…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Stuck at two red (dash) lights!

Posted by Jeff Kinzler on November 3, 2019 at 10:00pm 9 Comments

I hope someone can help solve these two electrical problems that appeared one after the other.

By way of background: The car, a '64 Eldorado has very limited use. It was at a restoration shop for 15 months until last January-  that supposedly did a bunch of wiring repairs including rebuilding the gas gauge that still hasn't worked properly, and the clock that hasn't worked, and re-soldering the broken wires in the drive door. All window and seat controls appear to be…


driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!


Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…



  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service