I converted my '64 to front disc brakes. I have the drums and shoes and parts that the car came with. Anyone can have them if you want them, just pay shipping, which won't be cheap since they are heavy. Hate to throw them out. They are in Connecticut. Can provide more detailed photos if you really want them. Brakes operated perfectly before I converted. I did that because I saw "Jay Leno's Garage" where he had converted an Imperial and some other cars to disc and was happy with the change. 

Views: 102

Reply to This

Replies to This Discussion

I'd be interested in hearing more about your conversion?

What kit did you use?  Any challenges with install and set-up?

I used a front disc conversion kit from Classic Performance Products which cost $745. It included an excellent new booster to replace the stock one. Other kids cost twice as much and this one is quite good. The pedal feel is different from when the drums were on, but it stops quicker and with more certitude. I'd never go back to drums, even for stock authenticity. My car is in excellent condition, but I'm not going to Pebble Beach. I drive it often and take it to local shows. And, these cars are heavy and we need them to stop without drama. 

As to challenges, yes, since you asked, but not because the job is so tough. I went to a local mechanic who'd done good work on the car. This conversion seemed to befuddle him. He kept the car for months. He said I needed spacers to create distance from the disc to the wheel, and I got them, but even then the car just sat there. I finally took it elsewhere and they got the whole thing done in one day!! With no spacers! So I have the original wheels on and it's great. The discs sometimes have the little squeak, and I have not dealt with it yet, it's nothing really. I know there's a spray but I have not bothered. A couple of times, with drums, the front wheels locked up and skidded and I thought, that's it, no more of this. It's a great upgrade. I'm used to the different pedal feel and there are no issues with the braking performance. Jay Leno was right. Oh, and I feel no need to convert the rears. The fronts were enough to improve the performance significantly. 

My Car was bought new off the showroom floor in 64 and extremely well maintained always over the years for the —-sheer LOVE of the machine 

In all the years I have owned my 64 convertible  I have not once had to question weather the stock drum brakes would stop the car —on a dime —when called apron 

That applies to many other Cadillac years I have owned 

So for me a disc brake replacement is of little value when the stock brakes  working correctly do the job they were designed to do 

Between the cost of the brake kit and a mechanic to do the job this is an expensive thing to replace something already doing the job it was designed to do 

Very sorry to hear the one guy kept your car for so long and did little work on it  ( just the BS routine ) 

They want the car in there shop so they look like they work on high end cars to there  other customers while tying up you great car 

Just my 2 cents on this upgrade —as there are an awful lot of ways to spend your dollars to bring a car back to life in so  very many areas 


Yes, you make some good points here. The stock drums should be adequate to stop the car. However, two things. In my case, the brakes locked up twice at a stop sign and screeched. I could either redo the brakes as is for a few hundred dollars, or for a little more change them out to disc with a more powerful booster. Seemed the wiser choice. Again, I got the idea from Jay Leno's show, where he swore by this change for his heavy Imperial. Disc brakes hit the Corvette in 1966 and then started spreading throughout all cars fairly soon. So clearly, they are the preferred choice. Soon after 1968-69 drums were unacceptable on any decent car but the lowest end of the market. Cadillac introduced them in 1968 if I'm not mistaken.


Is this the kit? 1134 USD now, 745 USD was a lot lower.

Here's the kit on Ebay, for $707, on sale from $745. It's for 61-66 Cadillac


And this one for under $500 without the new booster also listed. But these are brakes, you can't mess around, I'd get the new booster and have the right pressure and be safe. However, I'm not a brake expert. I've done everything to cars, including dismantle an engine to the block and rebuild it over the last 50 years, but not once have I touched the brake system. Being in a car that fails to go is one thing, but a car that fails to stop is quite another. So I have mechanics do brakes, though I gather they are pretty simple. 




  • Add Photos
  • View All


Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 3 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Grandpa’s Cadillac Restoration

Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 14 hours ago. 13 Replies

Hello friends! It’s been a while since I’ve visited this page. Last I left I had spoke about my late grandpa’s Cadillac that I planned on “restoring”, which really meant getting back on the road.…Continue

Crankshaft - ‘64 Sedan Deville

Started by Jordan Johansen-Moe in Wanted to Buy. Last reply by Jason Edge 18 hours ago. 1 Reply

Hello friends! I’m looking for a crankshaft for a 429 that will begin Grandpa’s Cadillac Restoration. I will be talking to a machine shop on Monday (fingers crossed). However, in the event I hear the…Continue

AC update

Started by Joe DiIaconi in Restoration Discussion. Last reply by Kevin Campbell on Friday. 11 Replies

Today's little project: I've been trying to squeeze as much AC out of this system as I possibly can living here in South Florida. Sunday when I was washing my engine I noticed some air escaping from…Continue

Blog Posts

1964 Cadillac Fleetwood sixty special / transmission dipstick needed

Posted by Pablo on September 20, 2020 at 9:57pm 1 Comment

How are you doing folks, I’m looking for a transmission dipstick, any info I will appreciated, thank you very much

1963 Cadillac hood driver side hinge

Posted by Steven on September 16, 2020 at 9:23am 1 Comment


 Does anyone know were I can buy a 1963 Cadillac hood driver side hinge or is there any other hinge that would fit? 



Bad Guage?

Posted by Karl Schwarz on August 26, 2020 at 3:08pm 5 Comments

So I am troubleshooting my fuel gauge issue. I bought a new sender and tested it. It  it goes from 1-ohm (empty) to 35-ohm (full). When I test it (outside the tank), when the float is in the up (full) position it only moves the gauge to about 1/2 full. When at the bottom (empty) position the gauge shows empty. This is the same issue I have when I fill and then use the gas in the tank - the gauge never reads ore than half full. Based on what I've read on this thread it would seem like the…



Posted by Fritz Seitz on August 11, 2020 at 2:35am 0 Comments

I have been working on a website-----www.fritzsautorepair.com-----

Does anyone have suggestions?


  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service