Happy Father's day to all the Dads, and to the Dad's that Inspired Us

I hope all the dad's out there have a great Father's Day, and each of us in turn remember the dad's that inspired us. My dad was a huge influence on me and cars and think back to all the great times we had with the old Cadillacs.  I was always more the "bookish" type around cars and he was always the more pragmatic hands-on type that taught me that you often learn a lot more by grabbing a hand full of tools and a flash light and just jumping under the car to figure out something.  In other words he taught me to learn by doing.  More importantly, our shared interest in cars deepened our bond and love for each other and always remember the great times we had together. Here is a video tribute I did of my dad a few years back using a song by Colin Hay, a favorite artist of mine, call 'Dear Father'.  The lyrics include the line "I've got your photograph" which brings me back to the many pictures we took working on the Cadllacs, a few of which you see in the video.

Perhaps others have memories with their dad, or sons and daughters they would like to share.

Views: 99

Reply to This

Replies to This Discussion

Jason,
Great tribute. My experience is kind of the opposite of yours. My dad was a mechanical engineer who took the analytical approach. I was the young kid who was good with tools so I just wanted to take everything apart and then figure out what I needed to do. Mini bike engine won't start? Better strip it down and rebuild it, I figured. Pop would often come in at this point and offer some wisdom and help put everything back together.
I did figure out a lot doing things this way but eventually learned that working smart sure beats working hard.
My son who happens to currently be serving in the Air Force, is also pretty mechanically inclined but from the start, he was more on the methodical side. Before he took on a project, he usually had a plan of attack he had formulated from internet research. I guess I am the oddball caveman in the middle.

If there was an information superhighway available to me when I was a kid, I probably wouldn't have checked it until I had everything apart and needed to figure out how to put it back together. I certainly rely on it now though and wonder how we managed without it.

Bit early..... Father's day is 1st Sunday in September. (in Australia at least)

Every day is Father's Day for me. I probabl think about my dad every time I go on my garage.

RSS

Photos

  • Add Photos
  • View All

Forum

Cadmium Plated Cadillac Bolts - More Used that You Can Shake a Dip Stick At!

Started by Jason Edge in General Discussion 8 hours ago. 0 Replies

I have now had just under 3,500 lb of Cadillac fasteners gold cadmium plated, one thing I don't run out of or have to run down to the hardware store are nuts and bolts.  I just replaced my 20+ year…Continue

Radiator Re-core PLEASE HELP

Started by Scott Santora in General Discussion. Last reply by Dennis P. DiBari yesterday. 4 Replies

I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green…Continue

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Cees de Bunje yesterday. 13 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox on Wednesday. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service