I am trying to upgrade headlites to brighter and clearer style. Any suggestions? Also, i want the dash lights to be brighter. Are there any manufacturers that make a conversion bulb that is LED? Any suggestions would be of great he

Views: 423

Reply to This

Replies to This Discussion

I installed Halogen headlights in my car. Gives a lot better lights. If you go this route use a relay to save on your original wiring harness, as you take current straight from the battery it will minimize current going through the light switch.

Wagner Halogen Sealed Beams H5001 & Wagner Halogen Sealed Beams H5006

Or you could convert to replaceable bulb type.

But whatever you do, install a relay just to be safe.

I bought two cheap relays (one for each low/high beam) and used them when converting. Now the current is going straight from the battery to the headlights. But the control is through the light-switch on the dash and the foot, so when you drive the car you won't see or feel a difference. Except that the lights-switch is cold.

I guess you can also buy a Quad H-4 Headlight Conversion Harness and use it. But its cheaper to build the system yourself.

I have a relay wire harness that is a simple plug and play design. The side effect is brighter dash lights, as the headlights are not stealing power from the headlight switch.

This way you can safely install any style or design of headlight you want. I use halogen headlights

The headlight relay wire harness is 75.00

email me if your interested.  russ85747@hotmail.com

I bought Russ's (Painless LOL) wiring harness. He does a good job putting them together. I'm like Anders and like to do this stuff myself but I was in the middle of ten things under the hood and this was plug and play. The system is basically hidden and only the trained eye will notice the relays beside the battery next to the fender.

What's funny is I haven't taken it for a lot of night rides since it was installed but the other night I was looking at dash and thought to myself "I don't remember my dash lights being this bright". Now I know why.

Hows that light relay work?

The stock routing of the headlight wiring is; battery to fuse panel to headlight switch to dimmer switch to headlights.  All the power has to pass through 5 connectors.

Amps and voltage get lost in the process, causing a dimmer headlight.

The relay is wired directly to the battery, so power goes from the battery to the headlights.

The low beam and high beam have a separate relay.   The stock headlight switch acts as the trigger to control the relays.  No power is lost and the redirecting of the power from the stock wire harness allows the dash lights to be a little bit brighter.

Thanks for the detailed explanation. I understand how it works now.  

I bought these from opgi and they made a huge difference, for my dash lights I had my custom audio shop put in led strips in my cluster to make it brighter, I’ll try o upload a photo of the dash
Here is my dash cluster after led strips

Wow! Very impressive looking. Kinda retro/hi tech look. Love it!

Thanks Jason

Eric,love what you did. Where did you purchase those leds? I am very impressed. Thanks, Jon



  • Add Photos
  • View All


Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 9 hours ago. 158 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Trunk Pull-down

Started by Brian and Dorothy Lewis in Restoration Discussion. Last reply by Jason Edge 10 hours ago. 9 Replies

Hi gang.  While reviewing the extensive photo archives on this site, I came across an excellent series of photos documenting a trunk pull-down assembly posted by Jason Edge.  I really didn't even…Continue

Exhaust manifold: Repair, replace or headers?

Started by Dutch Dickinsen in General Discussion. Last reply by Jason Edge 10 hours ago. 4 Replies

My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue

Tags: 429, manifold, exhaust

Steering Wheel

Started by Mark Borer in General Discussion. Last reply by Tony and Ginny 429 12 hours ago. 1 Reply

plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue

Blog Posts

Starter Solenoid replacement-how difficult? Where to buy?

Posted by Norman Silverman on August 20, 2019 at 8:24pm 8 Comments

Hello All.

I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …


Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…


Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.



Upper A Arm Rubber Bumpers

Posted by Gene McIlroy on August 12, 2019 at 1:30pm 3 Comments

I have found a very good replacement part for the Upper A Arm Bumpers.  The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were.  The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer.  Part number is on the box in the photos.  First photo is the box next to the box is the S10 part and an original.  Next photo shows my sanded down part next to an original.…



  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service