I am trying to upgrade headlites to brighter and clearer style. Any suggestions? Also, i want the dash lights to be brighter. Are there any manufacturers that make a conversion bulb that is LED? Any suggestions would be of great he

Views: 422

Reply to This

Replies to This Discussion

Thanks Jon, I had my local radio shop do it so I couldn’t tell you what they wound up using, I gave them an old gauge cluster to play with and once they got it right they installed on my original cluster

Eric, i still want to get my dash illuminated like yours. Do you have any more pictures? I loved the effect of your illumination. Thanks Jon

Eric the dash lights look fantastic. What did you use? The headlights would be close to $600 Canadian from opgi shipped to my door. I try not to buy anything from them.
Thanks Clovis. I agree OPGI shipping is ridiculous, maybe you can google the headlight specs and find them closer to you, I only changed my main set and truth be told I don’t do much night driving snyway
Eric I just saw the response on the gauge cluster. Talk to them about what they have and see if they want to list under our suppliers page. I'm thinking about buying Russ's nos gauge panel for $1,000,000.00. I might have a few pennies left to get those lights installed.
Jon

Just as a point of interest the dash lights on our year Cadillacs was supposed to be on the dim side from the factory
Your dash lights did not get dim from age most likely is my point
My 62 and 64 have the same dim dash lighting stock
I do think that its purpose was to create a soft mood in the cabin
I like the stock lighting mood created by the convertibles interior lighting
Just a heads up on the original lighting look that came in these cars

If more light is required --So be it

Enjoy
As I had stated earlier I have the upgraded headlight harness from Russ. Driving home tonight and it was almost pitch black out a little after seven. I also changed all headlights to halogen when I bought the car because there was three different kinds on it. My lights are clear and bright and were good even before the harness upgrade. But one thing came to mind is headlight aiming. After a car has been around for fifty plus years things move and get moved around a bit headlight wise. Sometimes an adjustment is a lot of help for better nighttime driving. Just a suggestion for anyone looking to improve things on the cheap.
You got a picture of those led headlights installed on the car?

RSS

Photos

  • Add Photos
  • View All

Forum

Steering Wheel

Started by Mark Borer in General Discussion 2 hours ago. 0 Replies

plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue

Exhaust manifold: Repair, replace or headers?

Started by Dutch Dickinsen in General Discussion 3 hours ago. 0 Replies

My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue

Tags: 429, manifold, exhaust

Help! I need a 1964 Eldorado front left fender.

Started by Jorge M in Wanted to Buy. Last reply by Jon Ettman 4 hours ago. 5 Replies

Help looking for a 1964 Eldorado front fender for a convertible.Thank you please contact djjmoreno84@gmail.comContinue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 23 hours ago. 157 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Upper A Arm Rubber Bumpers

Posted by Gene McIlroy on August 12, 2019 at 1:30pm 3 Comments

I have found a very good replacement part for the Upper A Arm Bumpers.  The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were.  The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer.  Part number is on the box in the photos.  First photo is the box next to the box is the S10 part and an original.  Next photo shows my sanded down part next to an original.…

Continue

Roof motor

Posted by Dermot Robinson on August 11, 2019 at 8:44am 2 Comments

Replacing my convertible roof motor.

Has anyone any experience or advice on replacing the roof motor on a 1964 Cadillac Deville .

Please..

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service