Holley is making a carb that will bolt up to our 63/64 Cadillac's. 

https://www.holley.com/products/fuel_systems/carburetors/demon/stre...

Views: 176

Reply to This

Replies to This Discussion

Has anyone tried one of these yet? Do our motors respond well to aftermarket carbs?

Charles

Anyone here try this carb yet? Probably going to preventative replace mine.

One Hell of an interesting carb for our cars 

Holly is all about performance 

Love to see some feedback from an installation that’s done 

This could be our new Go To Carb I would be thinking 

Very interesting design info 

Enjoy 

If ever replacing my original Carter I would go with the FiTech EFI. Costs a bit more but I think it might be  worth it.

Go Street EFI 400HP System

Mostly not a fan of new things until they are proven to be what they claim but the new Holly carb  looks real good to me from the get go 

i like the one with the space age material to keep temps down  20 degrees in the carb 

The Fi- tech is not a simple plug and play performance improvement and not for everyone 

Do read the info posted on this site that —Clovis has posted on the Fi- tech fuel injection system which he has done the most with of anyone here using it 

It requires a special canister under the hood to operate and the last issue that Clovis encountered was not having enough fuel pressure at an idle that should require an in tank fuel pump for that to happen 

Enjoy 

I do not see the ——vacuum port at the rear of the  new Holly carb that the  stock Carter ( or  aftermarket Edelbrock  carb ) has that is required for the 64 with the Turbo 400 trans to control  the shifting 

The carbs throttle linkage is designed —for other more modern transmissions than those in our cars as described in the video and not sure the Hydromatic with the TV rod could be modified to work with this carb easily 

Those two items may need to be addressed and some modification required —IF —this carb would be a possible choice for use  on our year cars ( getting to complicated for me ) 

Does look like this new Holly carb —could not be used —unless the items above could be addressed so it works in our cars 

That being the case to keep this reasonable simple I would just go with a stock carb rebuild ( Carter is a great carb  always ) or the Edelbrock after market carb ( that is the  original Carter carb with some slight improvements in design by  Edelbrock — the performance PEOPLE ! ) 

Took a little while to think this thru after the initial excitement of the new carb introduction 

i do have the Edelbrock 1406 with an electric choke on my 64 429 

The choke works better than the stock choke set up —but not perfect - just better

You will require a new aftermarket air cleaner due to the larger opening at the top of the carb or an adapter to mount the stock air cleaner ( that Russ sells ) 

One feature I really like is the 1406 has a vacuum port for the vacuum advance that changes the stock timing advance —to produce a bit more power from the engine ( the performance people ! )

Enjoy 

I really - really - like the Holly with the -space age plastics center that are keeping the fuel temps in the carb bowls —20 degrees cooler than the intake manifold temps 

Better fuel density = more engine power !

One of the better innovative carb designs that has come along in a long time 

Hope we see more of this in future performance carb designs 

i do Enjoy this kind of thinking to improve  carb design and performance 

Enjoy

RSS

Photos

  • Add Photos
  • View All

Forum

FUEL GAGE

Started by STEPHEN HORWATH in General Discussion. Last reply by Tony and Ginny 429 10 hours ago. 7 Replies

Hi just wondering if anyone else had a problem with their fuel gauge going up to full when key is turned to the on position or when the car is running.  it goes back to empty when key is in the off…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 23 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Front Window Motor Installation Help Needed

Started by Roy in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 yesterday. 9 Replies

I have a bad window motor in the passenger side door.  I have removed the door panel and am at a complete loss as to where to start and what to do from here.  Does anyone have any step by step…Continue

Intake manifold leak

Started by Joe DiIaconi in 1963/64 Cadillac Specific Discussion. Last reply by Roland Moser yesterday. 35 Replies

Anyone install better quality intake manifold gaskets?

Blog Posts

Hood Insulation

Posted by Dominic Salemi on July 3, 2019 at 9:15pm 2 Comments

Can anyone give me some information on what to use to secure my hood insulation to the hood.

Thanks

Dominic

64 Hood Hinge Color?

Posted by Bob Schles on June 27, 2019 at 4:46pm 2 Comments

Can someone tell me what color the hood hinges should be? I've seen both silver and gold cadmium plating colors on the cars. Thanks

Rear Side Window Stainless Sill Removal

Posted by Lee Martin on June 24, 2019 at 3:07pm 2 Comments

I'm looking to replace a piece of the stainless trim that sits on the outside of the car like a sill outside the rear passenger side window.  I can just barely see one screw at one end but does the door panel and/or window need to come out to access this?  If anyone has done this I'd like to learn what is involved.  Here's a photo of the piece I'm talking about:…

Continue

Cadillac Returns to its Roots Under New Leadership

Posted by Jeff Kinzler on May 1, 2019 at 12:30am 3 Comments

Cadillac’s new boss says they should stop trying to build BMWs and go back to building Cadillacs again.

What do you think? 

https://carbuzz.com/news/cadillac-finally-admits-what-everyone-knew-for-years

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service