Oh geez, a few on here have numerous other classic cars and last weekend I bought a bit of hybrid one.

Its a 1961 Austin Lancer (looks near identical to a Morris Major Elite) which are a Pommy derived thing built here in the great land Down-Under. They are only little, but have fins and chrome.... so pretty cool.

I got it off a 70 year old guy and his wife for a song, as it does require a paint job and few odds and ends sorted, as it hasn't seen the blacktop in 14 years.

The crazy bastard has fitted the car with a 2 litre, single OHC twin plug engine, 5 speed manual, a Ford Cortina diff, Fiat disc brakes and the list goes on. Its got massive sway bars, lowered and was setup for hill climbs. 

The best bit, is its been Mod Plated by our Transport authority, so rego will be a doodle. I can't wait to get this thing on the road. This thing be slicker than a Teflon coated turd off a chrome plated shovel.

At least now, I have something else to play with..... apart from myself.

Views: 322

Reply to This

Replies to This Discussion

I always wondered why people would put a sticker on the bumper... Now I know.

So what did you sing to force the elders to part with the car? Theme from Godfather?

Geez mate, that's a bit harsh...... :-)

A few weeks back, I needed to remove the two front seats. Stuffed my big friggin melon under to see what was involved and there was a jar under the seat. Long story short, it looked like it was full of washers or something.

Got it out, 1 x $100 note, 2 x $50 notes and 3x $20 and four dollars in loose change.

Now, I was very, very tempted to keep it, but I knew when I bought the car, they didn't have much money and I didn't give them anymore than I had too either.

So, being a good little boy, I rang them, got their account details and returned the $264.00

They were very grateful...... but i'm still waiting to see any good karma yet, days later I was down with the flu and i'm still struggling...... good karma my arse.

Always took you for Ebenezer Scrooge

How wrong I was.

Regarding the karma. You where suitable rewarded. The plan was ebola but you only got the flue. And the only one struggling is your wife Astrid. She has been struggling since day she met you. So be thankful please.  ;-)

Geez, you're in good form this week Anders.... ha ha ha ha ha

Well once in a while the coin drops all the way.  :-) 

RSS

Photos

  • Add Photos
  • View All

Forum

63 coupedebille fuel pump issues

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 5 hours ago. 20 Replies

I have a 63 cadillac and I took it to a mechanic for a motor tune up long story short the fuel pump gave out and hes tried twice to order it and he says it didnt fit the original pump is smaller on…Continue

A Before & After Example

Started by Jason Edge in Restoration Discussion yesterday. 0 Replies

Since I started cadmium plating the many fasteners and other items from the 55 and counting parts cars I have bought in (1200 lbs worth and counting), I have to say it has really taken the…Continue

Oil leaking out of oil cap breather

Started by mark zimmerman in Restoration Discussion. Last reply by mark zimmerman yesterday. 12 Replies

Hi i would like some ideas on this i replaced oil cap breather and pcv valve and still oil  coming out of breather at normal speeds down the road.This has been going on for quiet awhile from the…Continue

Update on fuel pump

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by William R Conte yesterday. 1 Reply

I'm still looking thru land and sea for this fuel pump anyone out there know what size engine I have here are some pics of the stamps on the block I found to make sure my engine is a 390 because the…Continue

Blog Posts

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service