Oh geez, a few on here have numerous other classic cars and last weekend I bought a bit of hybrid one.

Its a 1961 Austin Lancer (looks near identical to a Morris Major Elite) which are a Pommy derived thing built here in the great land Down-Under. They are only little, but have fins and chrome.... so pretty cool.

I got it off a 70 year old guy and his wife for a song, as it does require a paint job and few odds and ends sorted, as it hasn't seen the blacktop in 14 years.

The crazy bastard has fitted the car with a 2 litre, single OHC twin plug engine, 5 speed manual, a Ford Cortina diff, Fiat disc brakes and the list goes on. Its got massive sway bars, lowered and was setup for hill climbs. 

The best bit, is its been Mod Plated by our Transport authority, so rego will be a doodle. I can't wait to get this thing on the road. This thing be slicker than a Teflon coated turd off a chrome plated shovel.

At least now, I have something else to play with..... apart from myself.

Views: 53

Reply to This

Replies to This Discussion

Kevin

Sounds like a car you can have some fun with and nothing like stick shift for more control of the machine

You will appreciate this :
My son just bought a 1992 mustang fox body hatchback ( very light mustang body ) with a 408 stroker motor 6 speed with a FAB 9 strange rear end
All the other bells and whisles you would expect
650 HP on motor and will be spraying it for about 850 HP on the street
Should run in the 9's in the quarter mile

That kid of mine has speed in his DNA on land and the sea

Enjoy

Good on him....

Nice!........let's see some pictures lad.

I can see your chuffed to add that to the fleet.

A few pics of the mighty Austin Lancer. WE have all the missing bits and then some to assemble this evil little Austin. Brand new windscreen rubbers, door rubbers, NOS stuff..... should, go together fairly easily.

1. The Austin is only about 7 or 8 years old in this shot. It was used as a rally car and gymkhana car.

2. The only rust, was under the boot in the beaver panel. It was cut out by the previous owner (I have the piece) and have the new bit ready to weld in.
    That's being done on Saturday afternoon.

3. Ha ha ha, frenched/sunken radio aerial, slightly pumped rear guards... she's a custom jobbie. The fabricated rear bumper will be replaced by a MK1 Cortina unit.

4. Shit a brick, these little  2 litre Nissan motors go well. If anyone bumps into the robot from Lost In Space, tell him I have his missing arm.

5. Little bit of modified bodywork under the grille for the oil cooler and lecky fan

Cool looking little car, that looks like it will be a lot of fun.

And, hey it's got fins!

Congrats on the addition and good luck with it.

Thanks mate.... :-)

Kevin

Love seeing a car i never saw before coming out of your country
Keep us posted on your progress

This should keep you buzy for a bit

A competition ralley car should move around real sweet and be FUN to own !!

Enjoy

Whilst built here in Oz Tony, they are a pommy car.

But hey, anything with fins, chrome bumper, quarter window and a dipper switch on the floor is pretty damn cool in my eyes.

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 5 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

FUEL GAGE

Started by STEPHEN HORWATH in General Discussion. Last reply by Tony and Ginny 429 16 hours ago. 7 Replies

Hi just wondering if anyone else had a problem with their fuel gauge going up to full when key is turned to the on position or when the car is running.  it goes back to empty when key is in the off…Continue

Front Window Motor Installation Help Needed

Started by Roy in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 yesterday. 9 Replies

I have a bad window motor in the passenger side door.  I have removed the door panel and am at a complete loss as to where to start and what to do from here.  Does anyone have any step by step…Continue

Intake manifold leak

Started by Joe DiIaconi in 1963/64 Cadillac Specific Discussion. Last reply by Roland Moser yesterday. 35 Replies

Anyone install better quality intake manifold gaskets?

Blog Posts

Hood Insulation

Posted by Dominic Salemi on July 3, 2019 at 9:15pm 2 Comments

Can anyone give me some information on what to use to secure my hood insulation to the hood.

Thanks

Dominic

64 Hood Hinge Color?

Posted by Bob Schles on June 27, 2019 at 4:46pm 2 Comments

Can someone tell me what color the hood hinges should be? I've seen both silver and gold cadmium plating colors on the cars. Thanks

Rear Side Window Stainless Sill Removal

Posted by Lee Martin on June 24, 2019 at 3:07pm 2 Comments

I'm looking to replace a piece of the stainless trim that sits on the outside of the car like a sill outside the rear passenger side window.  I can just barely see one screw at one end but does the door panel and/or window need to come out to access this?  If anyone has done this I'd like to learn what is involved.  Here's a photo of the piece I'm talking about:…

Continue

Cadillac Returns to its Roots Under New Leadership

Posted by Jeff Kinzler on May 1, 2019 at 12:30am 3 Comments

Cadillac’s new boss says they should stop trying to build BMWs and go back to building Cadillacs again.

What do you think? 

https://carbuzz.com/news/cadillac-finally-admits-what-everyone-knew-for-years

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service