I get some pretty good heat wafting through the cab,,kind of comes and goes. happens with windows both up or down and the heat is NOT ON.. i can feel pretty good amounts of heat in the cab.  Would that be coming from the firewall or a gap or hole in there,  Its not coming from the ac vents or the heater vent,,the engine runs at 1/4 heat on the gauge,,  its seems to come and go,, 

I know there are no holes in the floor boards so I cant seem to pinpoint the heat,  its  a pretty good amount of heat

Should i look in to those insulated panels for floorboards and firewalls..??

Views: 128

Reply to This

Replies to This Discussion

Is the muffler pushed up against the floor?

Hi Tony,  Russ

Thanks for the thoughts.  I dud some u tube research last night.  Guy had a ford station wagon from late 60s.  Took out all the carpet, seats, etc.  Took for a ride and used a thermonmetrer to measure heat coming off the floor board.  Part of floor that sits right behind the exhaust manifolds was upwards of 175 degress!  They applied one of the reflective heat sound products and driving temp dropped to 78.  Thats a big drop.

I hv checked all my vents and no heat is leaking into them.  I will ck that jute stuff under carpet.

My muffler is one of those cherry bomb things,  i did not install, Prior owner did, . 

Im guessing my jute underlayment may be disformed after research and seeing that video.  I didnt realize there was that much heat transfer but it makes sense now after seeing that

I have an aftermarket universal heat shield on our muffler.

It does deflect some heat and it's worth having.

I just went on a hour ride,  floor panels were ok. But up were the carpet attches under the dash, there is a gap. And bare metal is exposed.  It was very warm.  And were the steering column goes throgh rhe floor.  I will look at putting some thing up there to stop it from radiating out.  It may be the draft in the car is carrying that heat around the cab .  Particularly on hot days . Just a guess.  

RSS

Photos

  • Add Photos
  • View All

Forum

Cadmium Plated Cadillac Bolts - More Used that You Can Shake a Dip Stick At!

Started by Jason Edge in General Discussion 8 hours ago. 0 Replies

I have now had just under 3,500 lb of Cadillac fasteners gold cadmium plated, one thing I don't run out of or have to run down to the hardware store are nuts and bolts.  I just replaced my 20+ year…Continue

Radiator Re-core PLEASE HELP

Started by Scott Santora in General Discussion. Last reply by Dennis P. DiBari yesterday. 4 Replies

I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green…Continue

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Cees de Bunje yesterday. 13 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox on Wednesday. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service