I cant seem to find the side marker bulbs20190212_134910.jpg let me know if u guys have any information on these

Views: 73

Reply to This

Replies to This Discussion

I use LED's in my side markers. Gives out a nice white light.

I bought a box of these odd NOS bulbs off of eBay awhile back. I'll let you know the type when I get home around from work and can get you the bulb part number. If you can't find any local, or you can't find any on eBay, let me know and I'll sell you some. 

The cornering light bulb is a 50 cp (candle power) 1195 bulb. It is brighter than the typical 32 CP 1157 tail park and light bulb, and32 CP 1156 backup bulbs.  I have VG used tested 1195 cornering light bulbs for $1.50 each or new ones like the one you see below for $3 each. I currently have about 20 new ones on hand. If you or anyone wants one email me at jasonedge@nc.rr.com and include shipping address.

ps. Bulb data is in your Shop manual (i.e. pg 123-99 in 1963 Shop Manual; pg 12-98 in 1964 Shop Manual)

Just to add, the LH cornering light in your picture has a very dull, corroded finish and you can put any kind of light in there and it is only going to be so bright and only throw light so far. To get the original brightness and really throw the light out to the front side as the cornering light was designed you need cornering lamps with nice shiny interior surface.   If you just put a light in the cornering light fixture in your picture it will be seen, but will not throw the light out. If you want some thing really nice you might consider something like this LH driver side cornering light and park light assembly I have up for sale:

Excellent 64 LH Cornering/Park Light From 41K Mile Donor Car $135  <-- Click for more pictures

RSS

Photos

  • Add Photos
  • View All

Forum

TURBO HYDRAMATIC

Started by STEPHEN HORWATH in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 1 hour ago. 14 Replies

I JUST ACQUIRED A 64 DEVILLE TURBO HYDRAMATIC TRANSMISSION FROM A PARTS CAR.COMES WITH SPACER,FLYWHEEL AND TORQUE CONVERTER AND SHIELD. I DONT KNOW WHAT A FAIRPRICE WOULD BE TO ASK. ANY SUGGESTIONS?Continue

Re upholstering seats

Started by paul in Restoration Discussion. Last reply by Mark S Anderson 1 hour ago. 2 Replies

Hello all, my question pertains to interior of a recent barn find.  A 1963 cadillac sedan with 16000 original miles.  Unfortunately it had mice in the car, so of course the whole interior which is…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 8 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Free front brake drums and shoes for '64 DeVille

Started by Preston Bealle in 1963/64 Cadillac Specific Discussion. Last reply by Preston Bealle 8 hours ago. 7 Replies

I converted my '64 to front disc brakes. I have the drums and shoes and parts that the car came with. Anyone can have them if you want them, just pay shipping, which won't be cheap since they are…Continue

Blog Posts

Is there a separate Starter Relay, or does the Solenoid serve that purpose?

Posted by Norman Silverman on August 30, 2019 at 5:57pm 7 Comments

Hello All.

I will be replacing the starter solenoid tomorrow (actually my mechanic will do the work, I'll just supervise). In checking the FSM electrical schematic and chapter verbiage, I don't see anything that looks like (or is referred to as) a starter Relay. It seems the Starter Solenoid serves the function and there's no separate relay. Right or Wrong?

If wrong, where…

Continue

Starter Solenoid replacement-how difficult? Where to buy?

Posted by Norman Silverman on August 20, 2019 at 8:24pm 8 Comments

Hello All.

I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …

Continue

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service