Hello everyone. It's been a while since I posted here and I hope all is well with everyone and they had a good winter. I can't remember who it is but I know there's an Australian in here too, so I hope they had a good Summer.

The other night I was driving around and found a new issue with the Cadillac. When the high beams are on, after a few minutes they go off. In fact, they end up blacking out all lights on the car. After a few seconds, they all come back on. Then this cycle repeats indefinitely. It doesn't seem to happen with just the regular lights on, so I'm guessing something is getting over loaded, or something is weak in the system. My initial thought is the headlight switch/relay in the dash.

Anyone run across this before and maybe have an idea how to trouble shoot it? Thanks in advance as always.

--Jake

Views: 302

Reply to This

Replies to This Discussion

Kevin

We use to pull off the top of our Carter carbs to rejet the carbs during time trials at the track ( i had a two four barrel set up )
No time to be wondering where your balls are in that case --LOL
We would pick up a car or two at the drags when we got the jetting right for the days weather
Thought you might enjoy that from one drag racer to another while on the carb rebuild parts all over the place ---subject

Enjoy

Russ
Enjoyed the shoe box ( flying parts under control idea )

Enjoy

For the time being, the car wins.  Russ, I will be sending you an email to get one of those harnesses from you.  I still have a feeling it is in the switch and will be sending it out to get it rebuilt.  However, I learned my lesson last year that I try to not send things out to get them fixed during the driving season since, well, it limits my time with the car.  I will be waiting until winter hits to send out the switch.  In the meantime, Russ, you have an order coming your way..........

Just to close this one out.  The harness from Russ has been installed.  The drama with the headlights is gone.  Pretty sure the problem is the headlight switch is weak. Thanks as always, Russ.  The led tail lights I ordered from you should be delivered tomorrow.

I'm a fan of keeping these things original, but with the break lights being as soon as they are and a lack of head rests, I figure the led tail light upgrade might reduce my chances of getting rear ended.

--Jake

RSS

Photos

  • Add Photos
  • View All

Forum

How much play in 63 timing chain?

Started by Ben Roberts in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 4 hours ago. 4 Replies

I will be installing a new chain and gears because I'm in this deep and all the forums here strongly recommend doing so.  It appears the coating is intact and I don't have to worry about that debris…Continue

Harmonic balancer holes are too shallow for the 3 bolts of puller

Started by Ben Roberts in 1963/64 Cadillac Specific Discussion. Last reply by Ben Roberts 17 hours ago. 3 Replies

Trying to pull 1963 390 harmonic balancer.  The holes needed for the 3 bolts on the puller can only thread in 1/4” which is not enough to run an impact wrench on it.  I ran a tap to clean the threads…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 20 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

G-1 differential, $150

Started by Jimmy Davis in For Sale. Last reply by Jimmy Davis on Thursday. 5 Replies

G-1 positraction differential, needs blasting and paint. $150. Pickup Huntsville AL or LTL, I recommend Averitt express. Send me zip for shipping quote.***Update- Sorry if you have tried to contact…Continue

Tags: differential, Rear, G-1

Blog Posts

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

AC/heater for 1964 Cadillac coupe de ville

Posted by Matias J. Adrogue on January 7, 2020 at 11:11am 9 Comments

Good morning!  I am Matias Adrogue.  I bought a 1964 Cadillac coupe de ville last year and am real close to the final restoration details!  I call her “Jaws 64”.  Pics will be posted soon.  I need advise regarding a AC/heater.  It came stock in the vehicle but it does not work.  A mechanic gave me a bid of $1700 to replace and repair.  I am ready to install a new system - Vintage Air or Old Air Products from Fort Worth Texas.  I would greatly appreciate your thoughts.  I read the great write…

Continue

63 cadi conv

Posted by Merlino jean marc on December 31, 2019 at 2:51pm 0 Comments

Hello everyone 

As a European, I fell in love with Americans cars and Americana stuff.

I bought a running 63 for cheap .but there is no secret when you buy cheap ,it is big project. The car needs everything. Overtime I was able to slowing buy parts .actually  I am looking for the passenger front lower section which is becoming harder ,and harder to find

The car has a lot of issue with rust.it needs a paint,a top and I need to replace all floor pans.with patience and…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service