Looking for 64 to 66 seat belt buckles, male and female together.

Hey all, I am in the process of finishing up my 64 coupe deville and noticed that the front seat belts only have the retractor side in the bag I put all the belts in when I got it. I have found it pretty difficult to find the correct belt latches and am in search of four or five sets. I would like to buy, in any condtion, four or five belt buckle and latch pairs with the Cadillac crest on them. I don't need anything but the buckle and latch pair, I am going to change the webbing on them anyway so they can be cut out. I have found that the 66 generation of buckles are the generic gm latch with the Cadillac crest on the button rather than the GM logo. The image shows the 66 belt buckle I already have.. 

Views: 31

Reply to This

Replies to This Discussion

Russ or one of the others may have seat belts but I am out and have 12 customers on my Wait List looking for this very sought after item. I can add you to my List if no one has one but the wait could indeed be a while. I will say that this is where being a Chapter Member has its advantages. Of those 12 on my Wait List, only 1 is a Chapter Member, that means join the Cadillac LaSalle Club (CLC) and then our free Chapter and you would then move immediately to #2 on my list jumping past regular customers that have been waiting since 2012.  If interested in joining the CLC check out this link: www.cadillaclasalleclub.org/join

I contacted Cadillac King in California and he said he has them, but he wants $97 each, which I see may be a reasonable price now that I have done some research. I honestly didn't realize how hard it would be to find them. I'm mad at myself because I had two of them and now can't find one of them. Someone out there probably has a big box of them that were never installed and just thinks they are junk.

welllllllll……. I was pleasantly surprised when I was uncovering my front seat to start tearing it down.....and.....I found the factory 1964 seat belts. In amazing condition. I feel like I won the lotto today. I am no longer looking for buckles. thanks to all that looked in on my post.

Good deal. Perhaps you have some rear seat belts pushed behind the seat. They had the same crested buckle and male tab insert.

Just Love you finding those seat belts hidden the way you did 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

How much play in 63 timing chain?

Started by Ben Roberts in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 3 hours ago. 4 Replies

I will be installing a new chain and gears because I'm in this deep and all the forums here strongly recommend doing so.  It appears the coating is intact and I don't have to worry about that debris…Continue

Harmonic balancer holes are too shallow for the 3 bolts of puller

Started by Ben Roberts in 1963/64 Cadillac Specific Discussion. Last reply by Ben Roberts 16 hours ago. 3 Replies

Trying to pull 1963 390 harmonic balancer.  The holes needed for the 3 bolts on the puller can only thread in 1/4” which is not enough to run an impact wrench on it.  I ran a tap to clean the threads…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 20 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

G-1 differential, $150

Started by Jimmy Davis in For Sale. Last reply by Jimmy Davis on Thursday. 5 Replies

G-1 positraction differential, needs blasting and paint. $150. Pickup Huntsville AL or LTL, I recommend Averitt express. Send me zip for shipping quote.***Update- Sorry if you have tried to contact…Continue

Tags: differential, Rear, G-1

Blog Posts

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

AC/heater for 1964 Cadillac coupe de ville

Posted by Matias J. Adrogue on January 7, 2020 at 11:11am 9 Comments

Good morning!  I am Matias Adrogue.  I bought a 1964 Cadillac coupe de ville last year and am real close to the final restoration details!  I call her “Jaws 64”.  Pics will be posted soon.  I need advise regarding a AC/heater.  It came stock in the vehicle but it does not work.  A mechanic gave me a bid of $1700 to replace and repair.  I am ready to install a new system - Vintage Air or Old Air Products from Fort Worth Texas.  I would greatly appreciate your thoughts.  I read the great write…

Continue

63 cadi conv

Posted by Merlino jean marc on December 31, 2019 at 2:51pm 0 Comments

Hello everyone 

As a European, I fell in love with Americans cars and Americana stuff.

I bought a running 63 for cheap .but there is no secret when you buy cheap ,it is big project. The car needs everything. Overtime I was able to slowing buy parts .actually  I am looking for the passenger front lower section which is becoming harder ,and harder to find

The car has a lot of issue with rust.it needs a paint,a top and I need to replace all floor pans.with patience and…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service