Need help finding some trim moldings for my 3rd car, a 1987 Buick Estate Wagon

I know this is a forum for 63/64 Cadillacs, but I have run out of options and hoping that someone would happen to stumble on a missing part for my non-woodie dark-blue 1987 Buick LeSabre Estate Wagon (color code GM 8592).

I bought a low mileage, one owner Estate Wagon last fall. The car is in near new condition except that the first owner scratched the right rear door and right rear fender when driving into the garage.

The car is now at the final stages at the body/paint shop and they will start to refit all moldings. However the rear right side door trim molding is missing and I need one. Prefer of course a new, but right now any condition will do.

Have been calling and mailing everything and everybody (including every scrapyard known to man) but so far no luck. All bigger auction site send automatic message if something pops up, but for over three months nothing. So my hope is that someone in here happens to find that parts car, junk yard, yard sale, flea market, craiglist or whatever and remembers me.

I would not mind buying all lower trim moldings including wheel wells for this car if these are in excellent condition. But priority is of course the right rear door trim molding. Its not the same as on other GM Estate Wagons, so a Caprice or Custom Cruiser won't work. Has to be a Buick LeSabre or Electra Estate Wagon. 1986-87 20654826 should be correct (at least that's what my 1989 Buick "B" catalgoue thinks). 1988-89 is different so not sure it would work.

From 1989 Buick LeSabre Estate Wagon parts and illustrations catalogue effective September 1988:

Here is a picture of the car today at the body/paint shop. It is in perfect condition with original color, but with modern lacquer. The car was completely sanded down before painting, including roof!

Here is a picture of the trim moldings that was fitted before repair. Note the missing one!

On the left side as reference:

The trim molding is of a stainless type base fastened by three rivets and adhesive tape. The blue "rubber" core thing is slided into the base and covers the rivets.

Views: 79

Reply to This

Replies to This Discussion

Just a thought, does anything else in the Buick or even GM range have a similar molding that can modified to suit?

Even a longer molding that can be shortened perhaps.

Looked on many Chevrolet Caprice and they don't have this molding at all. Haven't seen any Oldsmobile Custom Cruiser yet, but other parts like rear light housings are also different.

Found some better pictures of the left side rear door. Is exactly the same trim molding that goes on right side! So need two, but only have one.


Have you posted on the Buick Club "wanted" forums?

Yes and Station Wagon forum and some other general car forums. I don't expect to get lucky this way, just grasping. 

You do know, someone, somewhere, has been hoarding that molding for years and just waiting for your call.

Yes exactly. Only need the phone number. You have it? 

Hi, I'm not trying to be a wise guy here, but those strips, especially the ends, look identical to generic side body trim we used to install on all cars back in the 80s. Have you gone that route? I see PartsVoice comes up dry.

Hi Jeff, yes I have been told by some that these are generic and was dealer installed. But when digging deeper all non-woodie Buick Estate Wagons came with these from the factory.

I tried everything. Called every scrapyard in Sweden and a few in the states. Been searching Ebay constantly and been in contact with any and every GM spare parts seller I can find.

Haven't seen this particular version on any other model car. And I look on every American I can find. Also been to a few car-shows just to see if I could be lucky.

Maybe send an email to the Australian Buick Car Clubs, well, the ones in the USA as well of course. Car club guys might be a better option, at least they can put you in contact with owners of the same or similar model.

RSS

Photos

  • Add Photos
  • View All

Forum

64 driver tail light not working

Started by Kevin in 1963/64 Cadillac Specific Discussion. Last reply by Kevin 16 hours ago. 5 Replies

My driver side tail light does not work. The lights on the fin works, passenger side works. Check the fuses everything looks good. Should I follow the wire from the tail light and where does it run…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 21 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Brakes Went Out

Posted by Christopher Codd on August 8, 2018 at 8:25am 18 Comments

My '64 Cadillac DeVille had been sitting for awhile while I was travelling this summer and when I came home it had some issues starting. After replacing the plugs and the ignition coil, it was running better than it had in a long time but the brakes were sticking. I noticed the brake pedal was traveling a little farther than usual when slowing down. Soon after I noticed a hissing noise coming from around the brake pedal. Then I lost the brakes pretty much completely. I couldn't find any…

Continue

Tom and Dwight's excellent 64 Fleetwood tales

Posted by Norman Silverman on July 29, 2018 at 2:52pm 1 Comment

Wow, what a great recitation of events-and what a magnificent restoration. 

Thanks for providing a most pleasurable read.

Norm

Comfortron AC trouble shooting

Posted by Norman Silverman on July 23, 2018 at 8:54pm 5 Comments

OK, here we go.....

I got the book to troubleshoot the system. INDISPENSABLE to this effort. 

As I do a cursory exam, I see that the AC RECIRC SOLENOID is Cracked (the WHITE one in the engine compartment coming out of the HVAC body with two vacuum hoses on it). I tried to patch it up (cracked all around the base), but it does not look like it will hold. 

PLEASE TELL ME THAT REPLACING THIS PART IS NOT AS DIFFICULT AS I THINK IT IS, But I think it is a bear to…

Continue

A/C Issue / Stumped !

Posted by Dana G Cooper on July 23, 2018 at 6:29pm 37 Comments

My 63 CDV factory A/C was trash so I replaced every part in the system and converted to R134 . I also installed a STV bypass kit which eliminated the STV all together and converted the system to a cycling system.  I vacumed and charged the system with 36oz of 134. The system is cycling as it should and the pressures are right at 250 high side, cycle off at 25lbs and cycle back on at about 35lbs. It is making plenty of water on the low side hoses and evaporator drain. There is very good air…

Continue

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service