Having trouble finding a power steering return line for my 64 CDV.  Found a new power steering pressure  line, but havent had any luck with the retirn line.  Does anyone know what the fitting size is that goes to the steering gear box?  Ive found a return line for a 61 Caddy but not sure if itll work.

Thanks!

Views: 25

Reply to This

Replies to This Discussion

The return line is generic power steering return line hose.  Cut to fit and use any common clamp.

I also need the fitting that threads into the steering gear box.  There’s a lot of lines I’ve found with the fitting included but none for the 64

I have the fitting for $5. 1964's with AC also had the power steering pump cooler as seen below and described in 2nd picture. I have these in VG condition for $25. You can get the hose and cut to fit from any auto parts store, as Russ indicated. If looking to restore with original Tower Clamps I have them in VG+ condition for $5 each. Shoot me an email to jasonedge@nc.rr.com if interested in the fitting, tower clamps or cooler. 

RSS

Photos

  • Add Photos
  • View All

Forum

Convertible Top Cylinder Removal

Started by Brian Wiseman in 1963/64 Cadillac Specific Discussion. Last reply by Chris Codd 16 hours ago. 7 Replies

Just wanted to check before removing my 1964 convertible top cylinders.  I have the instructions from the 1964 shop manual.  I have identified, in Red #s, the bolts in the procedure with the images. …Continue

Input appreciated on a transmission issue

Started by Tosh Dickenson in General Discussion. Last reply by Tony and Ginny 429 17 hours ago. 11 Replies

Finally a sunny day to drive the Caddy into work!Alas when I set off down the road, I realized she wasn't shifting from first to any higher range.  I just drove it on Saturday and it was shifting…Continue

Mirror Passenger Side

Started by Bob Ricks in Wanted to Buy. Last reply by Bob Ricks 19 hours ago. 2 Replies

Seeking a Passenger Side Exterior Door Mirror.   Doesn't need to be perfect.1963 Caddy Coupe DevilleContinue

Headliner insulation

Started by Robert Alan Shannon in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon 20 hours ago. 4 Replies

 I have a question about the padding  used between the  headliner and  interior roof of hardtops . It's abt 1/8" thick and  I  want to remove this from my parts car because I use it for storage ;…Continue

Tags: padding, Headliner

Blog Posts

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service