Having trouble getting to controlling power windows from driver and passengers seat controllers.

  Can only operate windows from DRIVERS controls with lockout switch in EMERGENCY POSITION.

  Just  replaced power window relay with a known working relay-- still not working in any position other than emergency.

QUESTIONS::  What COLOR WIRE  lead is supposed to operate the Power Window relay. Which color wire leads are cut through the relay contact AND is /which one of them is the hot lead side ?

Thanks

Tom

Views: 145

Reply to This

Replies to This Discussion

Looks like i called this one
Glad you are on your way to solve your window issue
Enjoy having the power windows working

Do be looking for wiring that is broken under its covering
Bending the wire around a bit will show broken spots under the wire covering if they exist

Enjoy

Tony,

Sure does. Will be replacing that section AND checking all the other PRIOR repairs to those wires while I am at it.  55 year old wires -- many still with cloth tape falling off.

Thanks for the help. Gave me an opportunity to understand how the power to the windows works- well worth the effort. May have been a fire waiting to happen too.

Still need to clean up wiring in both passenger side  and rear drivers side after the drivers.

Tom

Many of my wire and soldering skills have been developed by building and flying large RC aircraft for 23 years
I have had an interest in flying model aircraft since i was 14 years old ( 74 now )
In NY i was flying RC aircraft with the engineers from Gruman and Speary aircraft factories on Long Island
The boys were building space shuttles during the week and flying RC aircraft in there leasure time and on weekends
These guys were all about Flying stuff as you could imagine !

The gentelman that does all the aluminum welding work on my sons race boat did most of the construction on the first space shuttle to the moon and many other combat aircraft

When we need something done we go right to --the head of the class --when doing any research on a given subject to share our passion for that subject

Enjoy

My brother had that interest in flying model gas powered planes as well. They built planes and had competition and shows near teterboro airport in NJ when we were teens. Got me interested in building planes and model boats as well. He had the flying ability especially for the control line planes.

So today I get back to the wiring in my daughters 64 deville convert. Very poor connections yet--a step at a time.

Thanks to all for the help!

Tom

RSS

Photos

  • Add Photos
  • View All

Forum

Wanted: retaining clips for dash pad legs

Started by Mark Geertsma in Wanted to Buy. Last reply by Russ Austin 6 hours ago. 1 Reply

Looking for the retaining clips (L+R) that the "legs" of the dashpad snap into. Mine are missing. Continue

1964 429 & Trans For Sale

Started by Russ in For Sale 14 hours ago. 0 Replies

Anyone in need of a 429 & trans? Was running when pulled from car but had low compression on a few cylinders if memory serves me right. Engine/trans are in Phoenix. Russ, 562.858.6926Continue

Center bearing - replacement.

Started by Anders in Restoration Discussion. Last reply by Norman Silverman 18 hours ago. 22 Replies

Had some sound from the propeller shaft and as the rear wheel bearings just been replaced I thought it would be the center bearing. Removed the propeller shaft and checked the center bearing (as per…Continue

Blog Posts

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…

Continue

Flashers

Posted by Mike Petrey on January 13, 2019 at 12:25pm 7 Comments

Where do the flashers go in my 64 Deville Convert.  I'm thinking that's why both turn signals stopped working.

Source for Motor mounts and Trans mounts 1964 SDV

Posted by Norman Silverman on January 9, 2019 at 4:23pm 4 Comments

Hi.

Where is the best place to purchase good quality motor mounts/trans mounts for my 1964 SDV? I see that Rock Auto has them for $8 and change, and others for $24 and change. Big difference. Is there a better place to buy them from?

Thanks

Norm

Events

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service