Is it possible to use Edlebrock main jets and needles in a Carter AFB Carburettor. My 64 Coupe Deville runs duel straight through exhaust and this makes the mixture week in mid range and top end. How can I improve fuelling. 

Views: 83

Attachments:

Reply to This

Replies to This Discussion

Edelbrock rods & jets fit.

Thanks. That's good news for me

Robin 

Do this — Call the Edelbrock techs  regarding your problem 

Give them the numbers on you primary  and secondary jets and your metering rods 

The parts are the same for both carbs 

You will find they are very very helpful  “performance guys “

You will need to be checking your spark plug color after your adjustments 

Your mixture WB right when your plugs burn a brown paper bag color 

I would do a complete tune including ign wires to have the engine on tune spec ( vacuum issue free ) and then do the jetting as I did do on my own 64 429 

Enjoy 

Thanks Bud

Robin, if you are dead serious on getting the mixture right and the car tuned perfectly, pick up an Edelbrock air to fuel mixture monitor. https://www.summitracing.com/parts/edl-6593?seid=srese1&gclid=E...

I put a bung in my 63 and 72 chevy truck.

Yes I have bin thinking about that. Looks the way to go. Thanks Bud

I deleted two of my posts 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

How much play in 63 timing chain?

Started by Ben Roberts in 1963/64 Cadillac Specific Discussion. Last reply by Ben Roberts 5 hours ago. 6 Replies

I will be installing a new chain and gears because I'm in this deep and all the forums here strongly recommend doing so.  It appears the coating is intact and I don't have to worry about that debris…Continue

The Australian Bushfires:.......

Started by Kevin Campbell in General Discussion. Last reply by Kevin Campbell 6 hours ago. 11 Replies

I know we have some Aussies on here and I have to say, Australia, is in a whole world of hurt at the moment, so do ya best to stay safe.Currently, in the southern states, 4 huge fire fronts, look…Continue

1964 sixty special fleetwood piston ring need help

Started by Pablo in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 8 hours ago. 1 Reply

Good morning, I just got an engine that needs piston rings , it’s a 429 cid , the measure of the piston is 104 14 according with the digital caliper, also the size of cylinder shows 105 01 , the…Continue

Blog Posts

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

AC/heater for 1964 Cadillac coupe de ville

Posted by Matias J. Adrogue on January 7, 2020 at 11:11am 9 Comments

Good morning!  I am Matias Adrogue.  I bought a 1964 Cadillac coupe de ville last year and am real close to the final restoration details!  I call her “Jaws 64”.  Pics will be posted soon.  I need advise regarding a AC/heater.  It came stock in the vehicle but it does not work.  A mechanic gave me a bid of $1700 to replace and repair.  I am ready to install a new system - Vintage Air or Old Air Products from Fort Worth Texas.  I would greatly appreciate your thoughts.  I read the great write…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service