got house built i have been slaving over for last 5 months,, now have time to work on the 63.
I just ordered some rubber parts for window rail, rear window pillar, and the window sweeps..in and out,
are there any other additional pieces i need to order, like clips or the like. and is there any particular method to use or will the manual explain the removal process.
Sincerely
Tags:
If you are removing the door glass, just take the 2 screws out that hold the roller bar to the window frame. The glass and frame will lift right up once you take the 2 screws out and remove the roller bar from the frame.
I was alos referring to the rubber strip that attached to the top,were the top o the window seals against the body, and the front of the door frame fits agains the front window pillar..
are those pulled out and then reapplied with an adhesive or are there screws on pins or clips on the underside that have to be removed and replaced...
The top roof line seal is held in place by the lips of the trim. I have used adhesive before. First time you install it, don't use adhesive, so you cab check the fit.
ok, thanks
i ordered the felts, etc from rtrw, and i just got through reading a long string on the suspension and rtrw and steeled etc,, was all that about the parts being inferior or one being the middle man for the other for suspension parts or does it apply to all there parts,,,,,, just curious as when i orders, i never got a response from rtrw, so i checked on the order and they said all th parts had to be ordered,,
Scott Santora Online
Started by Doug Scarrow in For Sale 5 hours ago. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 15 hours ago. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Started by Russ Austin in For Sale. Last reply by Russ Austin 17 hours ago. 2 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by