Just saw my first set of Sanders shorty headers for 64-66 429 engines at Classic Performance Parts 

Views: 38

Reply to This

Replies to This Discussion

Have only seen the Sanders long headers in the past that were less than a plug and play item needing modifications to the long headers to not lay against the engines oil pan on the passenger side when installed and a somewhat challenging installation in general 

The other issue is you having to make an alternator bracket to be mounting the alternator which still needs to be done with the shorties 

First time I have seen —-the Shorty headers for sale anyplace 

With the passenger side of the 429 exhaust getting more difficult to acquire as time marches on this might be an interesting solution to that problem 

Enjoy 

They do not fit. Many have tried. They fit 65 and up 429.

Russ 

A bit more research and I do agree they are not right for our years due to the frames design which changed in the later years 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

Rear trailing arm bushings- premature failure

Started by Doug Scarrow in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 1 hour ago. 97 Replies

    Last fall I replaced my rear yoke and trailing arm bushings . Now with 410 miles on them the large  rear trailing arm bushings are done . I contacted Rare Parts the maker and they were defensive…Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 13 hours ago. 171 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 13 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

'63 convertible visor mount questions

Started by Karl Schwarz in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 14 hours ago. 5 Replies

I've got a 1963 Series 62 convertible.Anyone know the size of the three screws used to mount the Striker Support to the trim above the windshield? The "Striker Support" appears to be the name of the…Continue

Blog Posts

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service