I will send to local upholstery shop  seats from my 63 sedan deville.

 I guess I should remove tracks with all electric gear so I can restore it etc.

My seat had power but it didn't moved forward or back.What lubrication I should use for seat transmission etc? Any tips to restore seats ?Thank you,Paul

Views: 154

Attachments:

Reply to This

Replies to This Discussion

Do a search of the help section. I think Jason Edge and others have some good tutorials on what and how to do it. 

The tracks on the seats usually get gummed u with dust and dirt. The horizontal movement rides on phenolic blocks, so a spray of silicone lube will suffice.  The tilt actuators depending on the year are gear or shaft driven. A spray of white lithium grease will do there.

lean the parts off with a spray can of brake parts cleaner.

The actual power pack to the power seat has different components that can malfunction. Just because you are getting power to the seal, doesn't say much.  Be sure the motor spins. If not, you will need to troubleshoot by it does not. Either a bad relay or a bad motor. next is the transmission. The grease inside gums up and stops the slides from moving.   A cleaning and relube will suffice. I use spray silicone on the sliders, and wheel bearing grease on the gears.  

Do not take the power pack to the upholstery shop. They will break it, somehow.

Clovis and Russ are as always giving good advise. But you might find it handy to learn how this website is working.

The two pages you will most likely find the stuff you need is "Help" and "Parts Suppliers". The rest is also good information and should be looked on.

Step 1.

Step 2, scroll down to the topic you are looking for:

When I'm new to a website I never check "Help", as in my simple mind Help contains instructions on how to use the website.

However "Help" on 6364cadillac.ning.com is the go to place. Look here first. If you don't find a solution and solved the problem please post a good description WITH pictures and Jason will tag it to "Help" thereby helping other members in the future. It is the best library for our cars. And used by others when sorting out the non-63/64 Cadillacs as well.

Excellent HELP Anders!

Thank you for all advice.

RSS

Photos

  • Add Photos
  • View All

Forum

CLC 2019 Grand National - Louisville, Kentucky, June 11-15, 2019

Started by Jason Edge in General Discussion. Last reply by Jason Edge 6 hours ago. 33 Replies

1963/64 Cadillac Chapter 2019 Grand National Page www.2019GN.6364Cadillac.com…Continue

Tags: National, Grand, CLC, 2019

1963 trunk latch pin

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion 15 hours ago. 0 Replies

I have a coupe deville and my trunk driver side came off looks like the pin came out of the latch I got pin and trunk out but for the love of me cant figure how the pin goes bk in came someone please…Continue

Comfort Control and voltage from the voltage regulator or alternator

Started by Christian Doerk in 1963/64 Cadillac Specific Discussion 21 hours ago. 0 Replies

I probably currently have a similar problem like Sam G in this post:…Continue

Tags: alternator, transducer, regulator, voltage, Control

courtesy light wiring

Started by Andy Kalnins in 1963/64 Cadillac Specific Discussion. Last reply by Mark S Anderson on Sunday. 16 Replies

My right rear door courtesy light has two wires- a solid red and a black w/ white stripe. What puzzles me is that both wires have voltage across them when the key is turned to the left or right. To…Continue

Tags: wiring, light, courtesy

Blog Posts

Cadillac Returns to its Roots Under New Leadership

Posted by Jeff Kinzler on May 1, 2019 at 12:30am 3 Comments

Cadillac’s new boss says they should stop trying to build BMWs and go back to building Cadillacs again.

What do you think? 

https://carbuzz.com/news/cadillac-finally-admits-what-everyone-knew-for-years

Radiator And Shrouds

Posted by Dominic Salemi on April 24, 2019 at 3:36pm 1 Comment

Hello

Anyone have a decent radiator and shrouds and hardware for a 1964 Cadillac deville. I have an alum. radiator and I'm deciding on to fix it or back to the original one. If I fix it I won't need parts.

Thanks

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…

Continue

Events

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service