Finally I began to restore seat transmission and seat adjusters. I'm almost finished with transmission -I have to lubricated.But I do have question about adjusters. After restore-painting ajusters I think I should lubricated springs and Jackscrew. And what about gearnut on the picture 3 ? What lubrication should I use if any?
Use white lithium grease on gears and moving parts
The seat controls in our cars when working as they should will always find you the --sweet spot to enjoy driving your super car
Not many cars i know offer this many seat positions but just another creature comfort to enjoy the ride in the most possible comfort ( similar to the LR couch )
Enjoy fixing the power seats
A nice thing to have working
White lithium grease gets sticky and gummy with age. I like to use wheel bearing grease.
Never took the time to watch it age --LOL !
Sure a good tip as i know this is some of the disasembly process leaned from the kind of work you do with our year cars
Do you know the grease that was used from the factory in the seat motor and the window motors on the gears ?
The factory used white lithium grease.
I clean adjusters with Evapo Rust -works great.I don't know if I should paint them since there are many moving parts on it.
I would paint them with the bases adjusted to differing positions on each coat. Then throw them in the oven at 225, one hour, to cure to a rock hard finish. Same as powder coating in my book (one of Jason's tips) let them air dry first though.