Hello,

First post, been lurking for a long time though! I'm hoping someone is able to tell me how many turns lock to lock the steering is in a stock '63??

Reason is I have the steering box out being rebuilt/modified and they're able to alter it to take into account the larger wheels/tires to stop them hitting the fenders at full lock, one of the dimensions they asked for was original turns lock to lock which I missed getting....

Any help would be appreciated!!

Sam

Views: 29

Reply to This

Replies to This Discussion

Sam
I do not have the answer but very interesting that that qqservice is available
First time i know of altering the steering box for the tire rub

Enjoy

Yeah it'll be interesting to see how it turns out, they're going to rebuild it with a different ratio and 'firm feel valving' as well so it'll basically be like a late model chev silverado etc. They're very well regarded so fingers crossed!

i believe its 3 or 3.5 lock to lock. 1 full turn plus half to the left and one full turn plus half to the right.

Cool thanks Chris!!

Unless you're sideways in the wet with oncoming traffic, then its about a 100 turns lock to lock. :-)

RSS

Photos

  • Add Photos
  • View All

Forum

Upper and lower Control Arms Bushings

Started by Joe DiIaconi in General Discussion 26 minutes ago. 0 Replies

Was just thinking if You Jason and You Russ and anyone else have a surplus of Upper and lower Control Arms you might want to replace the bushings and then sell them as a whole unit. I don't know if…Continue

Fuel pump again!

Started by Chris in General Discussion 2 hours ago. 0 Replies

Hi guys, well my fuel pump decided to crap out tonight after a Sunday cruise with the family. I had to get the car towed home since it wouldn’t start.I’ve written on here before regarding issues I’ve…Continue

question on oil pump priming and pressurets

Started by Tim Bobeck in 1963/64 Cadillac Specific Discussion 5 hours ago. 0 Replies

hi everyone , I have a 63 coupe  that I have rebuilt the 390 engine. Long story short, after getting it all together and in the car, I started to prime to oil pump with a drill and socket, and I…Continue

My new project ( upper control arm bushing )

Started by Joe DiIaconi in 1963/64 Cadillac Specific Discussion. Last reply by Joe DiIaconi 7 hours ago. 3 Replies

Has anyone found a good kit to replace all of the bushings including ball joints,  tie rod inner and outer, upper and lower control arm bushings, center link. I replace mine a couple years ago, but…Continue

Blog Posts

where do I find a new and better motor?

Posted by john kilbourne on May 24, 2018 at 11:43am 11 Comments

My '64 convert is getting better, but the engine remains questionable. Starts and runs well enough, powerful, but I think I hear a main bearing banging, the balance is not great and I'd like to upgrade to fuel injection if I can.

Are there dependable remans available of good quality? Are new crate engines available? Will more advanced engines from newer years fit?

Also, please, the diff ratio is quite high, lots of RPMs compared to today's cars. Are there diffs with lower…

Continue

1963 Cadillac DeVille

Posted by Sven on May 21, 2018 at 8:00am 0 Comments

Good morning community, I have this beautiful 1963 4 door for sale, asking cad$9999, that's about us$7750. I would bring it down south over the border to North Dakota or Minnesota.

If anyone is interested, feel free to ask questions.

Otherwise what are the best websites to sell classic cars in the states?



Please view this ad:



63 cadillac deville ,…

Continue

camshaft

Posted by Dave Fundaburg on May 20, 2018 at 11:49am 1 Comment

Has anyone used the performance camshafts offered by Kanter or Isky if so how do you like the upgrade in general and how is the idle quality and vacuum for power accessories any advice would be greatly appreciated, thanks.

Door jamb switchs

Posted by Anthony Boles on May 17, 2018 at 9:50am 9 Comments

I'm having problems with the door jamb switches,the interior lights will sometimes work or the interior lights will just stay on and run the battery down ,there's three black wires spliced together and one simgle black and white wire,what could be the problem. 

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service