Hi all,, i have had a bit of steering wander for the life of the car as I have owned it,,,,63 cdv,  i have chnged the outer tie rods, the steering gear box and the power steering pump box that holds the fluids,  and yet i still have that 5 or 6 inch play in the wheel when it moves, but he wheels dont move, and it seems i must look like a drunk driver sometimes as it seems to wander in the lane,,   

i have forgone any further purchasing and decided to fix the two Cads i have to very good running order,, and this, adn the AC (at very minimum comprssor needes work)   are the priortiy as of now..

the car has 160k miles, and the bushings and stuff look cracked, and in poor shape,, the rag joint looks pretty good, not worn looking at all.. so what would be the first thing to do,, just get one of the steering kits and make the replacements of worn beareing and bushings,,,?  i read the manual,, and while the info is there, its vague to me where to start,,,

Views: 257

Reply to This

Replies to This Discussion

10 4

i can say that of all the records i have on the car,, nothing has ever been done on the steering suspension of the car, it has 160k total miles on it,,,dont know if that has any bearing or not,,,

i got the car to the shop to have them look at that steering wander,,, i must admit, that i dint have the wheels alignned after i changed teh outer tie rods, but anyway, they got under and said the center link has a little bit of play in it and felt it should be changed,,, now,, should teh center link (the long metal bar) be changed or the bushings that it attached to or the perifery parts, appears to get a center link is several hundred dollars..so i am wondering what about a metal bar could be bad or is its the end pieces that go out that need to be replaced...

Change the center link. I get the part from ebay. 

Do i need any bushings or other parts to make that change?   Are these new parts or rebuilt or both? Is it doable from a home mechanic standpoint, or bettr to let them lift it up.

No bushings and I do not know of any remanufactured drag links.   You will need a tie rod puller so you do not damage the boots on the tie rods.

igot one ordered, supposed to be in next week.. let you know how it goes...hopefully, between this and an aliginment, the wander willl be gone..its a real driving hazard as it really looks like im driving drunk, 

RSS

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith yesterday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service