Hi guys, 

I just signed up here, thanks for letting me in :)

About 10 yrs ago I helped an acquaintance moving out of his storage and I came across this thing. 
It's a '64 (I believe) Sedan deVille, with a glass/acrylic roof. 

First I didn't believe what I saw, I took some pictures with probably the best camera phone one could get in 2009 or so :) hence the grainy sasquatch pictures. 

Anyway, I tried to find some information on it, and someone told me that it could be a car displayed on the World Fair in '64/65 or so, and only a hand full were made. 
Not sure on that story though, I couldn't verify. 

Maybe it's 'just' a custom built wedding car (since it's a four door), but it's unique for sure. 
As far as I can recall it's not in bad shape, but the front and engine are missing, and so are a lot of small bits. 
The glass part seems to be in a very well made shape representing the original roof line. 
It looked to be in good shape as well, but theres a layer of dust on it so hard to judge. 

So, I'm hoping for some more information on this one, I might want to buy it since it would make a hell of a nice car, or maybe assist in selling it for the owner to get it to the right person for it.

Time for some pics

Views: 137

Attachments:

Reply to This

Replies to This Discussion

Never seen that before, can you access the body tag?

No, but I might later on

It started life as a Fleetwood 60 Special. Note the left rear door vent window assembly. Also the Fleetwood-only moulding lying on the car at the base of the "C pillar" on the right side. 

Pretty wild looking thing.... you know you have to restore it, don't you.

Yes, but I have more projects like that :)

A wash and a rinse and good to go...    ;-)

Is it real glass or is it a plexiglass type of material? That's a really amazing find and I've never seen anything like it. A car this unique should definitely be brought back to life. It would be a showstopper. 

I'll try to have a look in the next couple of weeks and post some updates, thanks so far :)

RSS

Photos

  • Add Photos
  • View All

Forum

Rear glass

Started by David Stapp in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 9 hours ago. 9 Replies

anyone know of a company that makes the rear glass for our cars? I can’t seem to find any. 1964 4 door 4 window hard top.…Continue

front engine pulley removal

Started by tom servas in 1963/64 Cadillac Specific Discussion. Last reply by tom servas 10 hours ago. 7 Replies

Am removing the front cover on our 64 engine with AC. Have all 6 bolts that hold the pulley onto the damper removed, can wiggle the pulley BUT it will not come fully off the damper, Is there…Continue

Where can I buy resistance wire for my 1963?

Started by Tim Walterson in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 14 hours ago. 3 Replies

Hello - just signed up for this forum - looks like a great resource!  I perused the posts and did some searches.  I see most of the posts related to my questions are about doing away with resistance…Continue

Blog Posts

Is there a separate Starter Relay, or does the Solenoid serve that purpose?

Posted by Norman Silverman on August 30, 2019 at 5:57pm 7 Comments

Hello All.

I will be replacing the starter solenoid tomorrow (actually my mechanic will do the work, I'll just supervise). In checking the FSM electrical schematic and chapter verbiage, I don't see anything that looks like (or is referred to as) a starter Relay. It seems the Starter Solenoid serves the function and there's no separate relay. Right or Wrong?

If wrong, where…

Continue

Starter Solenoid replacement-how difficult? Where to buy?

Posted by Norman Silverman on August 20, 2019 at 8:24pm 8 Comments

Hello All.

I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …

Continue

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service