Hi Guys, just looking under the hood I noticed this 3 connection tied up. It seems to come out of the firewall with 3 others one of which appears to go to the cruise control unit (which isn't working as there is some sort of speedo cable tied up near the handbrake under the car another thing I will get onto)

Views: 199

Attachments:

Reply to This

Replies to This Discussion

I'll have a look on mine later today and see if I can be of any help.

I knew you'd be on that quickly mate. LOL

Thanks Anders so I'm onto it!

There is a plug to the cruise control unit, does it fit that?

I had a look on mine and Yep....

Go to the front of the cruise control and down low is where it'll plug in. I'd fit a new end on it though.

Thanks Kevin, appreciate you taking a look, seems mine may be missing some things, I cannot locate the male plug underneath.

Attachments:

down really low at the front. The washer bottle may be hiding it.

Even if you unbolt the CC unit and tip it back, there should be a connector down there. Mind you, it is disconnected and maybe that's the reason?

Just let me know if you need a picture of anything. My number is 0411 545 025, during work hours, as i'm a grumpy old prick other times.

My Fleetwood is fairly original and should be correct. Mind you, yours has been restored, so should be better I guess really.

Anyway, if ya need me, you have the number or if you want me to stay the hell away..... don't call.... LOL :-)

Yep found it thanks Kev!

Shane and I spoke on the phone yesterday for a fair while. This is great site for bringing folks together with a common interest.

It was pretty cool, as we had more than a few things in common, above and beyond, both being very smart, articulate classy guys with the good taste to own a 64 Fleetwood Sixty Special. :-)

Well, I don't know about all that but at least you speak the same language : )

RSS

Photos

  • Add Photos
  • View All

Forum

Custom '64 Eldorado on Bitchin' Rides Last Night

Started by Ian Osborne in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje 7 hours ago. 1 Reply

If anyone here is familiar with the show "Bitchin' Rides" they started work on a '64 Eldo on the episode that aired last night (12/5). I really like the show and they build some amazing custom…Continue

Trivia Question 16 - Standard Item You could Delete for Reduced Cost?

Started by Jason Edge in Trivia. Last reply by Kevin Campbell 7 hours ago. 17 Replies

OK. Here's a new trivia. There is at least one main standard (non-option) item that one could "delete" on a new 1963 or 1964 Cadillac for a reduced cost.  What is it?  For extra cigars, what is the…Continue

1963/64 Cadillac Chapter December 2019 Newsletter Posted

Started by Jason Edge in Newsletters yesterday. 0 Replies

I have just completed and posted the December 2019, 1963/64 Cadillac Chapter Newsletter to our…Continue

Tags: Newsletter, Chapter, 2019, December

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

still need a driveshaft

Posted by wayne weaver on November 26, 2019 at 11:53am 2 Comments

well thank you UPS for losing the driveshaft that Russ Austin shipped me. 

however i still need a rear driveshaft section for my 63. mine has a vibration due to the bushing inside of it. its a shame because the ball and sockets in the cardian joints are perfect but it has a woble on the balancing machine. so .  still need the rear section. anyone have a good one ? is there driveshaft alternatives to use ? i am really considering an LS swap and since im fighting the driveshaft search…

Continue

63 guidematic issues

Posted by maurice lapoiinte on November 24, 2019 at 3:10pm 0 Comments

 So my 63 guide matic headlamps stay on low beam all the time. I have so far bypassed the system and everything works normal. I have been thru the trouble shooting in the manual but this is where the confusion begins.on my car when the power relay is powered I have low beam and when its not powered I have highbeam, this appears to be opposite what the diagnosis says should be correct.The wiring is all original and no wires have been mixed up.has anyone ever unplugged the 2 wire connector…

Continue

Another advantage of the Pertronix III

Posted by Doug Scarrow on November 23, 2019 at 11:12am 1 Comment

   Having tried both the II and III I can say the multispark feature of the III offers a smoother idle . It is also easier to install .Does not require removal of the distributor

Stuck at two red (dash) lights!

Posted by Jeff Kinzler on November 3, 2019 at 10:00pm 9 Comments

I hope someone can help solve these two electrical problems that appeared one after the other.

By way of background: The car, a '64 Eldorado has very limited use. It was at a restoration shop for 15 months until last January-  that supposedly did a bunch of wiring repairs including rebuilding the gas gauge that still hasn't worked properly, and the clock that hasn't worked, and re-soldering the broken wires in the drive door. All window and seat controls appear to be…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service