Hi everbody, I've just uploaded a video in YouTube. It would be nice, if "somebody" takes a look and an ear to the sound. Here's the text: ""coldstart" by 20 degrees celsius outside temperature. rocker arms and shafts are new. the valve tips have only appr. 1 mm material left. the lifters and pushrods are "old", but they are looking good. oil and filter are changed. the rods and the lifters are spinning - I think, that this is normal. if the engine gets warmer, the noise is getting less. even after appr. 3 minutes the oil appears on the top of the rocker arm and goes down to the end to prime the valve tip. less than one: no oil. the oil indicator in the cockpit shows pressure quickly and any time. oil: 20 W 50. any suggestions ? oil pump? valves (guides) ? hydraulic lifters ? pushrods ? a rod knock ? or maybe everything....if you like, you can also e-mail me: sherrick@gmx.de. many thanks, Robert out of Germany."

Thank you friends !valvetrain noise cadillac 1964 429 cui

Views: 577

Reply to This

Replies to This Discussion

Hi Mark, the Kroon Oil is available in Germany. But, I've put in the 5 W 50 Synthetic Oil with the additive I've mentioned. The valve train noise - even in the coldest start - has not gone, but it's less than before. I've also checked the oil pressure with a gauge: it's 25 PSI at idling and 35 PSI in driving condition. That seems to be good (for me). But, I think, that I have to clean - or maybe replace - the lifters and the pushrods in time.

Hi Mark, the Kroon oil classic really seems to be perfect for our cars. So I think, I'll use this (10W30 or 15W40?) oil the next time before "riding" to Croatia this year. The oil, that I'm now using (5W50 synthetic with the additive) forces my engine to leak more than I can bear. Even the oil pump is leaking - although the pressure is perfect. So I take this as a "flush". 

Hi Robert,

Have used both, but prefer 15W40 over 10W30. Less “sweating”.

Yes Tony belly buttons LOL

Clovis

The expression they use in my neck of the woods is- everyone has an A--hole ( I hang out with a rough crowd )

There was this guy who had a belly button that Was shaped like a srew head
For years he ignored it but on day he could not take it any more
He unscrewed it ----and his Ass --fell OFF !!!!!!! LOL !!!!!

Do be careful what you screw --and unscrew --is the moral of that story

Enjoy

Robert, I had a tick from one or two of my lifters when I got the car. The engine had been rebuilt but it had sat for a bunch of years and never ran on the road. I did an engine flush with kerosene and the ticks went away. I did about four flushes in a row until the oil came out golden. I used cheap new oil with three liters of oil and three of kerosene. You can also use diesel fuel in place of kerosene. Do NOT drive on the road with the flushing fluid in the engine. Some genital reving to 3000 rpms with no load on the engine is fine. If the engine is full of sludge do not do this as it will dislodge said sludge and could do more damage. I do this to every used car I get and then change the oil every 5000 kilometers. Good luck

Speaking of different oil viscosity, I’ve  tried all different types of oil for my 64 and so far after using everything from 5W40 Mobil 1 to 10W30 Valvoline racing oil, my 64 for whatever reason will lose oil pressure using the lighter weight viscosity oils pretty fast. So I decided to go with Castrol GTX 20W50 oil with Rislone Zinc additive and so far the engine has been maintaining its oil pressure much better and the engine doesn’t tick or tap like it used to.

I have also dealt with valvetrain noise more specifically lifter tick/tap for the longest time. I installed an oil pressure gauge and after awhile of driving the oil pressure would drop to almost nothing! That was why the lifter tick would get so bad. I always keep an eye on it now and if ever that happens again, I immediately turn off the car. My engine has an oil pump problem obviously because this isn’t normal. I will eventually someday soon have to repair the oil pump, but for now using thicker oil had help make the engine run smoother.

Quote, "...some genital reving...." ??? I'd like to have been there to watch. LOL

r

I figured our resident perv would have caught that first! LOL

who?

I just fixed a friends 63 that was having oil pressure problems for the longest time. The oil pump end cap that contains the pressure regulator was bad, It had a wear mark where the piston was traveling at the pressure relief point, causing the loss in oil pressure at idle.

Installed a good end cap and the problem was solved.

Good to know Russ, is it a hard job to do? How long does a repair like that take? I might just end up taking the Caddy to the shop if it’s pretty involved since I just don’t have the time to do major work on my 64 right now. My new job has taken up a lot of my time and energy.

RSS

Photos

  • Add Photos
  • View All

Forum

Exhaust manifold: Repair, replace or headers?

Started by Dutch Dickinsen in General Discussion. Last reply by Dutch Dickinsen 28 minutes ago. 3 Replies

My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue

Tags: 429, manifold, exhaust

Steering Wheel

Started by Mark Borer in General Discussion. Last reply by Tony and Ginny 429 56 minutes ago. 1 Reply

plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue

A Drilling No-No .... That Worked!

Started by Jason Edge in General Discussion. Last reply by Jason Edge 9 hours ago. 16 Replies

Thought I would share a quick story regarding something I did that I generally do not recommend - Free handed drilling a broken front engine cover bolt.  Before I jump into it I will say I do not…Continue

Help! I need a 1964 Eldorado front left fender.

Started by Jorge M in Wanted to Buy. Last reply by Jon Ettman 20 hours ago. 5 Replies

Help looking for a 1964 Eldorado front fender for a convertible.Thank you please contact djjmoreno84@gmail.comContinue

Blog Posts

Starter Solenoid replacement-how difficult? Where to buy?

Posted by Norman Silverman on August 20, 2019 at 8:24pm 6 Comments

Hello All.

I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …

Continue

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Upper A Arm Rubber Bumpers

Posted by Gene McIlroy on August 12, 2019 at 1:30pm 3 Comments

I have found a very good replacement part for the Upper A Arm Bumpers.  The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were.  The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer.  Part number is on the box in the photos.  First photo is the box next to the box is the S10 part and an original.  Next photo shows my sanded down part next to an original.…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service